Axis P3925-LRE User Manual page 9

AXIS P3925-LRE Network Camera
Additional settings
Reduce motion blur in low-light conditions
To reduce motion blur in low-light conditions, adjust one or more of the following settings in Settings > Image > Exposure:
• Move the Blur-noise trade-off slider toward Low motion blur.
Note
When you increase the gain, image noise also increases.
• Set Max shutter to a shorter time, and Max gain to a higher value.
If you still have problems with motion blur:
• Increase the light level in the scene.
• Mount the camera so that objects move toward it or away from it rather than sideways.
Note
If you use a lens with a larger aperture, the depth of field gets shallower.
• Change to a lens with a larger aperture.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
Image without WDR.
Image with WDR.
9