Axis P3925-LRE Repainting Instructions
Hide thumbs
Also See for P3925-LRE:
- User manual (59 pages) ,
- Installation manual (28 pages) ,
- User manual (30 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Axis P3925-LRE
Summary of Contents for Axis P3925-LRE
- Page 1 AXIS P3925-LRE Network Camera Repainting Instructions...
-
Page 2: Impact On Warranty
Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment. - Page 3 Clean the parts properly to remove oil, grease and dust. For more information on the materials used in the product, see its datasheet at axis.com. Powder coated parts - Use a primer. Alternatively, remove the original powder coating down to the base material, using fine sandpaper, and clean the parts before painting.
- Page 4 AXIS P3925-LRE Network Camera Repaint the product 2. Remove the two screws and the bracket. 3. Remove the gasket.
- Page 5 AXIS P3925-LRE Network Camera Repaint the product Repainting 1. Mask the front window with the included cardboard. Make sure the cardboard is properly positioned. Reassemble the bracket and fasten the two screws. 2. Mask the IR windows with masking tape.
- Page 6 AXIS P3925-LRE Network Camera Repaint the product 3. Make sure all necessary preparations of the dome cover have been made. See Preparations on page 3 . 4. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer.
- Page 7 Repainting Instructions Ver. M3.2 AXIS P3925-LRE Network Camera Date: November 2020 © Axis Communications AB, 2020 Part No. T10156716...