Axis P3925-LRE User Manual page 15

AXIS P3925-LRE Network Camera
Additional settings
9. Go to System > Events > Rules and add a rule.
10. Type a name for the rule.
11. In the list of conditions, select AXIS Video Motion Detection.
12. In the list of actions, select Use overlay text.
13. Select a view area.
14. Type "Motion detected".
15. Set the duration.
16. Click Save.
Note
If you update the overlay text it will be automatically updated on all video streams dynamically.
Direct the camera to a preset position when the camera detects motion
This example explains how to set up the camera to go to a preset position when it detects motion in the image.
Make sure that AXIS Video Motion Detection is running:
1. Go to Settings > Apps > AXIS Video Motion Detection.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs. If you need help, see the
user manual for AXIS Video Motion Detection 4.
Add a preset position:
Go to Settings > PTZ and set where you want the camera to be directed by creating a preset position.
Create a rule:
1. Go to Settings > System > Events > Rules and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select a video motion detection condition under Application.
4. From the list of actions, select Go to preset position.
5. Select the preset position you want the camera to go to.
6. Click Save.
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/66917
15