Advertisement
Step Three
Attach the Metal Plate (8) to the bottom of Headboard and Footboard using Bolt M6 x 25mm (G)x2. Do not
tighten the bolt until you make adjustment for screw hole at Side Rail. Next, insert Screw 3.5 x 30mm (J) and tighten
the bolt using M4 Allen Key (A). Insert Leg (7) into the bottom of Metal Plate (8) using M8 Spring Washer (H)
and M8 Nut (I). Hold the M8 Nut (I) using M13 Spanner (K) and twist the Leg (7) to secure in place.
Repeat for the other 3 legs.
For Headboard
M6 x 25mm (G)
1
8
3
AFTER INSERTING BOLT M6 x 25MM,
MAKE ADJUSTMENT FOR SCREW HOLE,
THEN INSERT THE SCREW 3.5 X 30MM.
THEN TIGHTEN THE BOLT AND SCREW
FIXINGS FULLY.
STEP 2
M8 Spring
Washer (H)
3
M13 Spanner (K)
H.
7.
M8 Spring Washer
x 4
Legs x 4
STEP 1
M4 (A)
M6 x 25mm (G)
Yellow sticker
face down
3.5 x 30mm (J)
1
8
Twist the wooden leg
7
x2
8.
K.
Metal plates x 4
M13 Spanner x 1
For Footboard
M4 (A)
M6 x 25mm (G)
3.5 x 30mm (J)
TWIST WOODEN LEG ONLY
WITHOUT MOVING THE M8 NUT,
SPRING WASHER AND SPANNER
J.
I.
Screw
M8 Nut x 4
3.5 x 30mm x 4
4/6
M6 x 25mm (G)
2
8
3
G.
A.
M6 x 25mm Bolt
M4 Allen Key x 1
x 8
Advertisement
