What To Do If Your Appliance Does Not Work; Sistema De Seguridad; Antes Del Primer Uso - Moulinex JU585H Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
• Important: All juice must be consumed immediately. On contact with air, it is very
quickly oxidised, which can change its taste, colour and nutritional value. Apple
and pear juices quickly turn brown. Add a few drops of lemon juice to slow this
discoloration.
CLEANING
• All removable parts (A, B, C, D, G, L, M and N) may be cleaned in the
dishwasher, except for the juice collector (E). The juice collector (E) must be
cleaned straight after use in soapy water.
• This appliance is easier to clean immediately after use.
• Do not use scouring pads, acetone, alcohol (white spirit), etc. to clean the
appliance.
• The sieve must be handled with care. Avoid any mishandling that may affect the
performance of the appliance. The sieve can be cleaned with the brush (O).
Change your sieve at the first sign of wear or damage.
• Clean the motor unit with a damp cloth. Dry carefully.
• Never immerse the motor unit under running water.

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?

PROBLEMS
The plug is not inserted correctly; the
control switch (I) is neither on "1" nor
on "2".
The appliance does not work.
The cover (C) is not properly
secured.
The sieve (D) is not properly fitted.
The appliance is giving off a smell
or is very hot to touch, is making an
abnormal noise or smoking.
The quantity of fruit or vegetables
being processed is too great.
The flow of juice decreases.
The sieve (D) is blocked.
For any other problem or fault, please contact your approved Service centre.
CAUSES
SOLUTIONS
Plug the appliance into a socket with the
correct voltage. Turn the control switch to
speed "1" or "2".
Check that the cover (C) is properly
fitted and secured by the safety clamp
(H).
Check that the sieve (D) is fitted
properly onto the drive shaft (J).
Leave the appliance to cool and
reduce the quantity of fruit or
vegetables being processed.
Switch off the appliance, clean the
feed tube (B) and the sieve (D).
7
ADVERTENCIA: las precauciones de seguridad forman parte del aparato.
Léalas detenidamente antes de utilizar el aparato por primera vez.
Guárdelas en un lugar al que pueda acudir para futuras consultas.
DESCRIPCIÓN
A Empujador
B Tubo de llenado
C Tapa
D Filtro
E Recipiente recogedor de zumo
F Vertedor con sistema antigoteo
G Recipiente recogedor de pulpa
H Brida de cierre

SISTEMA DE SEGURIDAD

El aparato está equipado con un sistema de seguridad. Para poder utilizar la
licuadora, la tapa (C) deberá estar correctamente bloqueada con la brida de
cierre (H). Al soltar la brida de cierre (H) la licuadora se detendrá. Al finalizar un ciclo
de uso, sitúe el mando (I) en la posición 0 y espere a que el filtro (D) se detenga por
completo antes de quitar la tapa.

ANTES DEL PRIMER USO

• Le recomendamos que lave todas las piezas extraíbles (A, B, C, D, E, G, L, M, N) con
agua caliente y jabón (consulte el apartado "Limpieza"). Enjuáguelas y séquelas
con cuidado.
• Saque el aparato de su embalaje y colóquelo sobre una superficie sólida y estable.
• Antes de comenzar a utilizar el aparato, compruebe que ha retirado
correctamente todos los elementos del embalaje.
USO
• Coloque el recipiente recogedor de zumo (E) en el cuerpo del aparato,
haciendo pasar el vertedor a través del orificio del cuerpo (consulte Fig. 1).
• Coloque el filtro (D) en el recipiente recogedor de zumo (E). Compruebe que el
filtro esté fijado correctamente sobre el eje de arrastre (J). Deberá oír un clic
cuando el filtro quede correctamente situado (consulte Fig. 2).
• Coloque la tapa (C) sobre el aparato, con el orificio de evacuación hacia la
parte posterior (consulte Fig. 3).
• Empuje la brida de cierre (H) hacia la parte posterior hasta que quede cerrada,
lo cual se confirmará al oír un "Clac" (consulte Fig. 4).
• Coloque el recipiente recogedor de pulpa (G) en la parte posterior del aparato
(consulte Fig. 5).
• Introduzca el empujador (A) en el tubo (B) alineando la ranura del empujador
con el pequeño carril guía del tubo.
I Mando (2 velocidades)
J Eje de arrastre
K Bloque motor
L Tapa de la jarra de zumo
M Separador de espuma
N Jarra de zumo
O Cepillo
P Cable retráctil
8
ES

Advertisement

Table of Contents
loading

Table of Contents