Putting Into Operation; Periodical Maintenance - EPTA iarp COUNTER TOP 50 Use And Maintenance

Warning! Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
Warning! Do not damage the cooling fluid circuit.
Warning! Do not damage walls of the machine: the cooling fluid circuit may damage.

PUTTING INTO OPERATION

Check that the voltage on the identification
plate is the same as that of the network.
THE ELECTRICAL SUPPLY LINE TO
WHICH THE REFRIGERATOR WILL HAVE TO
BE CONNECTED IS TO BE PROTECTED BY
A VERY SENSITIVE DIFFERENTIAL SWITCH
(Rc=16A,Dc=30mA); IT IS ALSO TO BE LINKED
TO THE GENERAL EARTHING PLANT.
The manufacturer disclaims all responsability for any
damage to people or things due to incorrect observance
of this rule.
Earthing is necessary and compulsory by law.
Absolutely never use reduction units, patch cords,
adapters or multiple socket outlets to connect the
counter.
DIRECTLY connect the equipment to the mains.
Operation is regular with ambient temperature indicated on technical data plate placed inside the tank.

PERIODICAL MAINTENANCE

Any further adjustments on the refrigerator necessarily require the electric plug to be removed.
Check periodically the supply cable in order to detect any damage.
If the power supply cable is damaged, don't use the equipment and don't try to repair it: to prevent any
risk, it must be replaced by the manufacturer, by a member of the after sales service staff, or anyway
by a person having similar qualifications.
In any case, none of the protective elements must be removed by non qualified staff. Absolutely avoid
using the refrigerator without such protection.
The replacement of lamps must be carried out only by an Authorized Service Center.
The lamps have to be replaced by identical lamps only.
Per una buona conservazione delle superfici dell'apparecchio operare come segue:
MOBILE ESTERNO: Quando è necessario pulire delicatamente il mobile esterno usare un panno
morbido imbevuto di soluzione di acqua e detersivo neutro.
SUPERFICI IN PLASTICA: Lavare con acqua e saponi neutri, sciacquare ed asciugare con panno
morbido; evitare assolutamente l'uso di alcool, acetone e solventi che deteriorano permanentemente
le superfici.
SUPERFICI IN ACCIAIO INOSSIDABILE: lavare con acqua tiepida e saponi neutri ed asciugare
con panno morbido; evitare pagliette o lana di acciaio che possono deteriorare le superfici.
SUPERFICI IN VETRO: Usare unicamente prodotti specifici per la pulizia dei vetri.
Non è consigliabile usare acqua in quanto può depositare calcare sulla superficie del vetro.
-8-