Page 2
C OR N ET BA R STOOL Jonas Trampdach’s Cornet barstool is a classic barstool using an innovative steel tube technique inspired by bicycle racks. The round solid oak seat rests on a slender steel base, creating an interesting balance of proportions and profi les.
Page 3
CAUTION With a little care you can prolong the life of your furniture. Follow the instructions for the materials of your specific product to make sure that it stays in the best shape for as long as possible.* − Always remove stains quickly before they can do any permanent damage to the furniture.
Page 4
− Avoid improper use such as tilting the seats on their back legs or standing on it. − Be careful not to scratch or damage the surface with sharp objects. − Avoid covering the surface partially, for example with cushions or skins, as colour variances may appear.
Page 5
CA R E GUIDE Oiled wood Wipe with a clean, dry cloth. If the surface is dirty, wipe with a clean cloth wrung in water or in a solution of water and a neutral detergent or soap fl akes. Re- move any soap residue immediately using a clean, dry cloth.
Page 6
clean lint-free cloth. Leave the furniture to dry over- night (min. 12 hours) and avoid placing anything on the surface before it is completely dry. If the grain of the wood rises after oiling, gently sand down the wood using fi ne-grit sandpaper (No. 180 or 240), always sanding in the direction of the grain.
Page 7
Powder coated or chromed steel Wipe with a clean cloth wrung in water or in a solu- tion of water and a neutral detergent. Remove soap residue immediately using a clean, dry cloth. Avoid using scouring cream or scouring pads, as they may scratch the surface.
Need help?
Do you have a question about the Cornet Barstool and is the answer not in the manual?
Questions and answers