Download Print this page

Massoth LGB 2x98x Saxonian IK Quick Manual

Backfitting with a ls decoder

Download this manual

Umbaubericht

Lokomotiven

LGB 2x98x Saxonian IK

Backfitting plan for the Saxonian IK with a LS Decoder.

Needed parts:

1x 8211098 LS-Sounddecoder IK

1x 8241010 Speaker Massoth: 8 Ohm, 3 Watt, 57 mm

Some small parts from the junk box: Screws, Washers

Conversion of the locomotive:

• The fine parts above should be subtracted before to avoid damaging it.

• Disasemble loco, first remove 6 screws as shown in figure 1.

Then you can pull out the gear easily (not complete!) and yet, as in Figures 2 and 3 solve the other 3

screws.

Figure-1: Removing the first 6 screws.

Stand 17.04.2020

Seite 1 / 4

Need help?

Do you have a question about the LGB 2x98x Saxonian IK and is the answer not in the manual?

Page 1 Backfitting plan for the Saxonian IK with a LS Decoder. Needed parts: 1x 8211098 LS-Sounddecoder IK 1x 8241010 Speaker Massoth: 8 Ohm, 3 Watt, 57 mm Some small parts from the junk box: Screws, Washers Conversion of the locomotive: • The fine parts above should be subtracted before to avoid damaging it.
Page 2 Umbaubericht Lokomotiven Figure-2: Removing the rear 2 screws under the gear. Stand 17.04.2020 Seite 2 / 4...
Page 3 Umbaubericht Lokomotiven Figure-3: Removing the front screw under the gear. Then as shown in Figure 4 Insert the speaker into the holder provided with washers. Now remove the jumper on LGB onboard adapter and attach cables to the LS as seen in the picture. Store the cord well.
Page 4 Umbaubericht Lokomotiven Figure-4: Fully integrated electronics LS Then screw together the locomotive again reversed. Stand 17.04.2020 Seite 4 / 4...