Advertisement
HR M
ANUAL
6.3
Cleaning the unit
6.4
Scheduled maintenance
Manual version 3.0 (10-10-2017)
You can clean the interior and exterior of the unit with a
damp cloth and a domestic cleaning agent. Do not use any sol-
vents.
It is recommended to have the following inspection and main-
tenance activities performed annually by an installer or other
technical expert.
•
Check the casing, the suspension or mounting structure,
and the securing of the unit.
•
Check whether the filters are clean enough and undam-
aged. Replace the filters if necessary.
•
Check that the heat exchanger or the electrical heating
elements are clean. Settled dust may cause an unpleasant
smell.
Carefully remove dust with a vacuum cleaner.
•
Check that the plate heat exchangers are clean. Clean
them if necessary.
•
Check all connections of the cabling.
•
Check the operation of the fans and the valves.
•
Check the condensate drain:
-
Clean the drainage container.
-
Flush the drain pipe.
-
Check that the trap is filled with water.
See also:
2.12 Switching on and checking operation op pagina 27
6.2
"Replacing or cleaning the filter" on page 58
6.3
"Cleaning the unit" on page 59
7.1
"Cleaning the plate heat exchangers" on page 60
en
M
AINTENANCE
en-59
Advertisement
