Advertisement
HR M
ANUAL
35. Ventilation
46. Maximum discharge temperature
47. Overheat protection
Manual version 3.0 (10-10-2017)
Heating OFF option
Not applicable to all versions of the unit.
Use this function to enable or disable the option which allows
the user to switch the heating ON/OFF manually.
Error display
Some error messages may be caused by external factors and
do not necessarily have an influence on the functioning of the
unit.
Use this function to suppress these messages. Safety-related
warnings will always be displayed.
Not applicable to all versions of the unit.
Note:
n
Leave ventilation control in manual mode.
Not applicable to all versions of the unit.
The controller limits the discharge temperature to a maxi-
mum of 50°C. Possibly set a lower value in order to save
energy.
Not applicable to all versions of the unit.
If the actual room temperature becomes higher than the pre-
set room temperature, the heating can be switched off in
order to prevent the room from becoming too warm.
Set the temperature above which the heating must be disabled.
Note:
n
This function can only be used if the unit is set to
automatic.
Note:
n
If this function is activated, then function
air temperature
is ignored.
O
-
PERATION VIA B
TOUCH
6. Minimum
en-39
en
Advertisement
