Biddle HR 25 Manual page 22

en
I
NSTALLATION
en-22
2.8.2 Mounting and connecting the control panel
1. Lay the control cable.
2. Slide the control panel out of the wall holder.
3. Connect the control cable to terminal X397.
Caution:
c
Ensure that the wall behind the wall holder is even.
4. Screw the wall holder onto the electronics module, the
junction box or against the wall.
2.8.3 Connecting the b-touch panel to the unit
1. Connect the control cable to the electronics module 1.
H
EAT RECOVERY UNIT