Advertisement
en
2
. . Installation
2.1
Inspection on delivery
2.2
Hanging the unit up
en-14
Warning:
w
Installation activities may only be performed
by technical staff qualified for this purpose.
Warning:
w
Before starting installation: read the safety
instructions.
See also:
1.5
"Safety instructions" on page 12
•
Check the unit and the packaging to ensure that they have
been delivered in good order. Notify the driver and the
supplier immediately if any shipping damage is detected.
•
Ensure that all components are present. Notify supplier of
any missing parts immediately.
See also:
1.4
"Components and accessories" on page 11
2.2.1 Determining the location of the unit
•
Make sure that the structure from which the unit is about
to be suspended can bear at least 4 times the weight of the
unit. The unit's weight is indicated on its type plate.
•
The distance between the floor and the unit's underside
must be more than 2.7 m.
•
Make sure that the electronics and the pressure meters on
the unit's long side remain easily accessible.
•
Keep the underside of the unit accessible on account of
the inspection hatches.
Advertisement
