Using Modem To Computer - 3Com 3C900B Installation And Operating Instructions Manual

Use the "Connections Control" screen to
configure the following settings:
DATA TERMINAL READY (DTR)
ERROR CORRECTION
DATA COMPRESSION
CARRIER DETECT
For detailed information about these settings,
refer to the "Glossary" or the "Technical Quick
Reference" sections of this manual.
TIP:
On external modems,
receiving a Data Terminal Ready signal
causes the TR light to light up.
Click Help for quick definitions of terminology
used in this screen.
U M S
SING ODEM TATION
Once you have configured your Connection
Control settings, click Save to Modem to
save your settings

Using Modem to Computer

These settings control how your modem and
computer communicate with each other. They
control what you see on your terminal screen
and how results are displayed.
77