Table of Contents
Advertisement
External connection system
Applicable wire size
Operation indicator
External
supply
power
Fuse rating*
Internal current consumption
1: Time in the I/O section.
*
*
2: The maximum load current varies with the number of simultaneous ON points.
Refer to the following information:
Relationships between output load current (common current), number of
simultan-eous ON points and ambient temperature
0.1A~ 16points
1.6A
0.08A~ 16points
1.28A
3: A fuse-blown error will also be displayed when the external supply p
*
switches off.
4: The fuse in the output unit is provided to prevent the external wiring from burning
*
out if the outputs of the unit are shorted.
Therefore, it may not protect the output elements.
The fuse may not be blown if the output elements are damaged in the fault mode
other than a short circuit.
Voltage*
3
Current
4
Weight
Accessory
Ambient temperature
I/O Specifications
40-pin connector
0.3mm
12/24VDC
(10.2 to 26.4V, ripple percentage 5% or less)
1.65A for external output
0.05A for internal consumption only
2A fuse, unreplaceable
250g(0.55lb)
1 piece of external wiring connector
(soldered type)
3
2
None
0.10A
51•
55•
ower
Advertisement
Table of Contents
