Download Print this page

Kohler Flipside 17492T Installation Instructions page 2

Handspray

Advertisement

手持花洒渊1冤的限流器不可取出遥
将滤网垫片渊3冤放入软管(4袁客户
自备)接头内袁将毡垫渊2冤放入手持
花洒内袁将手持花洒旋紧到软管
上袁软管另一端连接水源遥
旋转手持花洒头部可以获得不同
水流方式,见右图遥
喷孔杂质或结垢会导致水流变形袁
流量变小遥 打开水源袁用力按压或
摩擦橡胶喷孔袁去除杂质或水垢遥
拆下手持花洒渊1冤遥 先将滤网垫片
渊3冤和毡垫渊2冤从手持花洒中依次
取出遥用热醋清洗滤网垫片上的滤
网袁清洗垫片滤网和毡垫遥 重新将
毡垫和滤网垫片装入手持花洒遥重
新装回手持花洒遥
1120859-2-A
1
2
3
4
雨淋式
激射式
Koverage
Kurrent
风暴式
云雾式
Komotion
Kotton
Don't remove the regulator of handspray
(1). Put the screen washer(3) into the
shower hose( 4, not provided) connector,
put the filter(2) into the handspray, screw
the handspray to the shower hose.
Connect another end of shower hose to the
water supply.
Rotate the head of the handspray to
change the spray patterns as shown.
Any debris or mineral build-up may cause
the flow stream to become distorted or
reduce the flowrate. To remove the debris
or mineral build-up, run water through the
handspray, firmly press or rub your finger
back and forth across the rubber nozzles.
Remove the handspray(1). Take out the
screen washer(3) and the filter(2) from
the handspray. Clean the filters of the
screen washer by soaking them in warm
vinegar. Clean the screen washer and
filter. Reinstall the filter and screen
washer into the handspray. Reinstall the
handspray.

Advertisement

loading

This manual is also suitable for:

Flipside 17493tFlipside 17494t