Advertisement
用带尖工具把白色塞扣拨下遥
用 2.5mm 六角扳手 (客户自备)把
四个螺钉拆下遥
将上下盖拆下后袁即可拆下云雾式
出水口遥
用白醋浸泡 30 分钟后即可清除污
垢遥
确保 O 型圈的位置正确遥
按顺序装回所有零件遥
适用于所有加工处理过的表面院以
中性肥皂水清洗镀层表面袁再以干
净的软布彻底擦干整个表面遥 许多
清洁剂袁比如氨水尧去污粉及洁厕灵
等袁会对电镀表面造成伤害袁切忌使
用遥
有磨损性的清洁用具或清洁剂也
不可使用于科勒牌的水龙头及其
配件上遥
1120859-2-A
Grommet
塞扣
Screw
螺钉
Kotton Spray
云雾式出水口
O-ring
O型圈
Use a suitable tool to remove the four
grommets.
Using the 2.5mm hexagon wrench(not
supplied), remove the four screws.
Separate the sprayplate assembly into its
individual components.
O-ring
Clean the kotton spray by soaking them in
O型圈
warm vinegar for 30 minutes.
Make sure that the O-rings are
located correctly.
Reassemble the components in reverse
order.
All Finishes: Clean the finish with mild
soap and warm water. Wipe entire
surface completely dry with clean soft
cloth. Many cleaners may contain
chemicals, such as ammonia, chlorine,
toilet cleaner etc. which could adversely
affect the finish and are not reco
mmended for cleaning.
Do not use abrasive cleaners or solvents
on Kohler faucets and fittings.
Advertisement
