Use Of Product - Ikon Illumahood Neat & Pure Installation And User Manual

How to use 5 Spd Dig Touch Control Product

11. Use of product

11 USE OF PRODUCT
11.1 How to use 5 Spd Dig Touch Control Product
Fig. 14: 5 Spd Dig Button
Cleaning Periods for Metal Filters
22
1. Press this button to turn on the product.Fig. 14
2. Press this button to decrease the motor speed.Fig. 14
3. Dig display You can follow which speed the product is cur-
rently working on this display.Fig. 14
4. Press this button to increase the motor speed.Fig. 14
5. When timer button is pressed, a 15-minute timer function will
be activated; display will give a signal once the timer starts
and the motor will stop automatically after 15 minutes.Fig. 14
6. Press this button to turn on and off the lamp.Fig. 14
Filters should be cleaned when "C" signal appears on the Display
or (due to usage) every 2 or 3 weeks. To delete "C" signal after the
filters are cleaned and replaced, press and hold (
than 3 secs (when device is off). Letter "E" will appear on the Dis-
play and it will switch to normal operation. If operation before
deleting the "C" signal is required, active motor speed will appear
for 1 sec when you press (
resume running.
HOOD USER GUIDE ENGLISH
PAGE 17
) button more
) button and then the motor will
28.03.2019