Table of Contents
Advertisement
5. Cleaning of activated carbon filter pad
5
Cleaning of Activated Carbon Filter Pad
Placing the active carbon filter
Fig. 6: Placing the active carbon filter
1
Active carbon filter
2
Fixing pin
3
Metal oil filter
4
Fixing holes for active carbon filter
Washing n a dishwasher
After cleaning
CLEANING AND PREVENTIVE MAINTENANCE
Placing the active carbon filter
6. Cleaning and maintenance
6
CLEANING AND PREVENTIVE MAINTENANCE
28.03.2019
1.
Removing the metal oil filters (
filter" on page 13).
2.
Active carbon filter is placed on the rear side of the metal oil
filter Push it to the side to remove it.(Fig. 6).
3.
Wash the active carbon filter in the dishwasher.
Active carbon filter may be washed 3 times.
Then the active carbon filter must be
replaced by a new one.
4.
Place the active carbon filter in the dishwasher loosely and
steeply and without any other dishes.
5.
Start a program with a maximum temperature of 55° C.
6.
Let the active carbon filter to dry in open air for 24 hours or
40 minutes at 80° C.
7.
Place the washed or new active carbon filter on the metal oil
filter.
CAUTION!
Cleaning and user maintenance of the appliance
shall not be performed by unattended children.
The surface could be damaged due to aggressive and abrasive
n
cleaning agents. Never use aggressive and abrasive cleaning
agents. Supply your cleaning and protective substances that
are appropriate for your appliance from the authorized tech-
nical service. Surface of appliance and control units are sensi-
tive to scratching.
Clean the surfaces with a soft and damp cloth, dish-washing
n
liquid or mild glass cleaning agent. Soften the dry, sticky dirt
with a damp cloth. Do not scrape!
It is not appropriate to use dry cloths, sponges that may
n
scratch, materials that require rubbing, and other aggressive
cleaning agents containing sand, soda, acid or chlorine.
Clean the stainless steel surfaces in their brushing direction
n
only.
Do not use stainless steel cleaning agents and wet clothes for
n
control units. Cleaning of metal grease filters Used metal
grease filters retain the greasy particles in the moisture and
vapour generated in the kitchen. Clean the metal grease filters
about every three months, under normal use conditions (1 to 2
hours a day).
Do not use excessively effective, acidic or alkaline cleaning
n
agents.
For cleaning the metal grease filters, clean the holder parts of
n
HOOD USER GUIDE ENGLISH
the metal grease filters in the appliance, with a damp cloth as
well.
You can clean the metal grease filters in the dishwasher or by
n
hand.
Do not apply spray cleaning supplies directly to the product.
n
Do not keep flammable and/or heavy decorative items on the
n
product.
PAGE 11
Ä "Placing the active carbon
13
Advertisement
Table of Contents
