Assembly Of Product - Ikon Illumahood Neat & Pure Installation And User Manual

ASSEMBLY OF PRODUCT

Installation Diagram and Components
10. Assembly of product
10 ASSEMBLY OF PRODUCT
10.1 Installation Diagram and Components
Fig. 11
Fig. 12
1 Ceiling carrier locking mechanism
2 Product Hanging Plate
20
1 Ceiling
2 8 x plastic dowel, Ø 10 mm
3 Ceiling Hanging Plate
4 8x 5.5x60 Wall Mount Screw
1. Drill the surface where product will be installed from the
points A, B, C, D with Ø10 mm drill (Fig. 11).
2. Insert Ø10 mm plastic dowels into the drilled points
A,B,C,D,E,F,G,H(Fig. 11).
3. Install the Ceiling Connection plate to the ceiling at points
A,B,C,D,E,F,G,H with 5.5x60 screws (4) (Fig. 11).
3 Ceiling carrier plate cover
4 Hanging Plate
5 Ceiling Hanger Plate Feeder Cable Layout Plan
HOOD USER GUIDE ENGLISH
PAGE 15
28.03.2019