Carbon Filter; Installation Of The Appliance; The Hood - Ikon IK82 User Manual

Carbon Filter

Active carbon filters shall be used for filtering the
air inside the room and giving it back to the room
in environments without a flue connection. You may
procure the active carbon filter from your authorized
dealer or service. De-energize the appliance before
replacing the carbon filter. Carbon filter shall be
replaced every 3 to 5 months based on the frequency
of operation as it is used in kitchens without flue
outlet. Do not wash the carbon filter. Always have oil
filters installed on the appliance without respect to the
availability of the carbon filter. Do not operate your
appliance without oil filter. Replacement of carbon
filterThere are 2 carbon filters on the appliance.
Rotate the carbon filter clockwise to install it.
Figure 1
Figure 1
Replacement of Aluminum Cartridge
Carbon Filter
Press on the upper catch and pull towards yourself
to remove the carbon filter. Figure 1a
Figure 1a

Installation of the Appliance

Installation of the suspension plate to

the hood:

There are 2 (L) shaped suspension plates available in
the installation accessories to suspend the appliance
to the wall. These plates are supplied with a screw
set to provide ease of installation. Screw these plates
on M5 drive nuts on the cabinets with M5 x 40 screws
before suspending the appliance. Figure 2
Installation of the plastic flue to the
hood: Fix the plastic flue to the motor connection
plate with a 3.5x9.5 screw. Figure 3
Drilling of Suspension Holes
Fix the installation template to the surface where
the hood shall be suspended and drill holes in the
points marked with (A,B,C) using a Ø 8 mm drill bit.
Figure 4
Tap 10 mm plastic dowels to the holes you have
drilled.
9
Figure 2
Figure 3