Related Manuals for SafeWaze FS807
Summary of Contents for SafeWaze FS807
- Page 1 User Manual FS807 60’ PORTABLE KERNMANTLE ROPE HORIZONTAL LIFELINE Compliant with OSHA 1910, OSHA 1926 Subpart M and ANSI A10.32 2011 V1.0 2017 Copyright SAFEWAZE ™...
-
Page 2: Table Of Contents
7 COMPONENTS AND SPECIFICATIONS ..8 8 INSTALLATION AND USE ........ 9 9 UNINSTALL GUIDE ......... 10 10 FALL CLEARANCE CHART ......10 11 INSPECTION AND MAINTENANCE ....11 12 INSPECTION LOG .......... 12 12 LABELS ............13 Page 2 V1.0 2017 Copyright SAFEWAZE ™... -
Page 3: Introduction & Scope Of Use
OSHA or any applicable state agency. This manual and any other instructional material must be available to the user of the equipment. The user must understand how to safely and effectively use the FS807, and all fall protection equipment used in conjunction with the FS807. -
Page 4: Applicable Safety Standards
Product Specific Applications Personal Fall Arrest: SAFEWAZE™ FS807 Horizontal Lifelines can be used as part of a complete Personal Fall Arrest System (PFAS) for a maximum of 3 users. The structure utilized for attachment must be capable of withstanding a load of 5,000 lbs in all directions permitted by the system. -
Page 5: Limitations
***Diagram shown is an example fall clearance calculation ONLY. Lanyard Length (6’ Total) Required distance Deceleration from distance (4’ total) Anchorage (18’ total) Height of harness dorsal D-ring from worker’s feet (6’ total) Safety factor (2’ total) Page 5 V1.0 2017 Copyright SAFEWAZE ™... -
Page 6: Compatibility Of Connections
(see Figure 3). Connectors must be compatible in size, shape, and strength. Self-locking snap hooks and carabiners are required by ANSI Z359 and OSHA guidelines. Contact SAFEWAZE™ if you have any questions about compatibility. NOTE: SOME SPECIALITY CONNECTORS HAVE ADDITIONAL REQUIREMENTS. - Page 7 Ensure all connectors are fully closed and locked. SAFEWAZE™ connectors (snap hooks and carabiners) are designed to be used only as specified in each product’s user’s instructions. See figure 4 for examples of inappropriate connections.
-
Page 8: Components And Specifications
User Manual FIGURE 4 - INAPPROPRIATE CONNECTIONS Components and Specifications Storage / Transport Bag Tensioner Cross Arm Straps Carabiners O-rings Rope Lifeline Page 8 V1.0 2017 Copyright SAFEWAZE ™... -
Page 9: Installation And Use
The sag of the lifeline should not exceed 4 in (100 mm). Thimbled End of Rope to Anchorage Housing Plates Closed Front Housing Plate Free End of Rope at Tensioner Rear Housing Plate Drum of Tensioner Tensioning Lever Page 9 V1.0 2017 Copyright SAFEWAZE ™... -
Page 10: Uninstall Guide
Rotate tension lever counter clockwise to unlock drum assembly FIGURE 3 FS807 Fall Clearance Chart SAFEWAZE Required Clearance for up to 3 Users Maximum 60 ft span Fall Clearance with Fall Clearance with Fall Clearance with Span Length in... -
Page 11: Inspection And Maintenance
NEVER ATTEMPT TO SERVICE THIS UNIT OR TAMPER WITH ITS FUNCTION IN ANY WAY! Storage When not installed, the SAFEWAZE™ FS807 Horizontal Lifeline should be stored in a cool, dry place out of direct sunlight. Do not store in areas where damage from environmental factors such as heat, light, excessive moisture, oil, chemicals and their vapors, or other degrading elements may be present. -
Page 12: Inspection Log
User Manual Inspection Log INSPECTED DATE CONDITION OF SYSTEM Page 12 V1.0 2017 Copyright SAFEWAZE ™... -
Page 13: Labels
User Manual Labels Page 13 V1.0 2017 Copyright SAFEWAZE ™... - Page 14 User Manual WARRANTY SAFEWAZE™ 322 Industrail Court Concord, NC 28025 PHONE: 1-704-262-7893 FAX: 1-704-262-9051 EMAIL: info@safewaze.com Web: safewaze.com V1.0 2017 Copyright SAFEWAZE ™...