Koso 1246463 Instructions

Gear Indicator
Thank you for purchasing our
reference.

Notice

1. This meter works on DC12V applications only.
2. For installation, please follow the steps described below. Any damage caused by a wrong installation shall be imputed to the user.
3. Do not cut or modify the wire terminal. To avoid shortcircuits, do not pull the wires when installing.
4. Do not disassemble or change any parts.
5. Maintenance or repair should be executed by our professionals only. Opening the instrument will void the warranty.
6. While riding the vehicle, do not attempt to change the settings in order to avoid injuries.
7. This meters only works with digital speed / RPM signal (TTL SIGNAL 0-5V) motorcycles.
MARK MEANING:
Some procedures must be followed to avoid damage to the meter.
Some procedures must be followed to avoid any injuries.
Some procedures must be followed to avoid damages to your vehicle.

Accessories

1
1
Meter X1
Please contact your local distributor if the items received are not the same as the ones listed above.

2 Wiring installation

Honda GROM wiring diagram

Functions

3
37mm
INsTRUCTION
Honda GROM Gear Indicator. Before operating the meter, please read this instruction sheet and keep it for future
2
Velcro X1
Black / Ground
Blue / Neutral
Yellow / RPM signal
Green / Speed signal
● Gear meter
● Effective voltage
●Effective temperature range
●Meter standard
●Meter size
●Meter weight
Design and specification are subject to change without notice.
When the speed is too low, the meter might not be able to detect any signal.
17mm
3
Mid-way connector X5
Red / KEY ON
Black / From Bike
Green, Black / From Bike
Green, Red/ From Bike
Yellow, Green / From Bike
White, Red / From Bike
Display range: N, 1, 2, 3, 4, 5, 6, 7
DC 12V
-10~+60°C (14~140°F)
JIS D 0203
37 X 51 X 17mm
~51g
Press the Press the
button once button 3
seconds
wh002kn01c