Product Introduction - Adamson IS Series User Manual

IS10n
IS10n Sub Compact Line Array
• The IS10n is a sub-compact line array enclosure designed for extended throw capabilities. It contains two
symmetrically arrayed 10" transducers and a 4" compression driver mounted on an Adamson sound chamber.
The high frequency sound chamber is designed to couple multiple cabinets across the entire intended frequency
band without loss of coherence.
• The operational frequency range of the IS10n is 60 Hz to 18 kHz. The use of proprietary technologies such as
Controlled Summation Technology and Advanced Core Architecture allow high maximum SPL and maintains a
consistent nominal horizontal dispersion pattern of 80° down to 400 Hz.
• The enclosure has an unobtrusive visual design which blends seamlessly into the surrounding space, is made of
marine grade birch plywood, and has a four-point rigging system. Without sacrificing low resonance to composite
material, the IS10n is able to maintain a low weight of 25.6 kg / 56.5 lbs.
• Up to twenty IS10n can be flown in the same array when using the IS10 & IS119 Support Frame and up to 4 when
using the IS10 Micro Frame. Nine rigging positions are available allowing vertical inter-cabinet splay angles from
0° to 10°. Always consult Blueprint AV™ and the IS-Series Line Array Rigging Manual for correct rigging positions
(including ground stacking options) and installation procedures.
• The IS10n is intended to be used as a standalone system or with the IS119 companion subwoofer, which brings
the usable frequency range down to 30 Hz. The IS10n can also be paired with other IS-Series subwoofers.
• The IS10n is designed for use with Lab.gruppen's D-Series line of installation amplifiers. The nominal impedance of
the IS10n is 8 Ω per band, maximizing amplifier efficiency.
Adamson Systems Engineering |
IS10n User Manual
Page 4