Adamson IS Series User Manual page 2

Sub compact line array

Hide thumbs Also See for IS Series:

IS10n User Manual

Distribution Date: May 1st, 2021

This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe

place and make it available upon request to any operator.

Resale of this product must include a copy of this manual.

This manual can be downloaded from

https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10n

Declarations

EU Declaration of Conformity

Adamson Systems Engineering declares that the

products stated below are in conformance with the

relevant fundamental health and safety criteria of the

applicable EC Directive(s), in particular:

Directive 2014/35/EU: Low Voltage Directive

IS10n - 973-0008, 973-0009, 973-0011, 973-5008,

973-5009, 973-5011

Directive 2006/42/EC: Machinery Directive

IS10 & IS119 Support Frame - 930-0028, 930-0035,

930-5028

Extended Beam - 930-0021, 930-5021

Moving Point Extended Beam - 930-0033, 930-5033

IS10 Micro Frame - 930-0030, 930-5030

Line Array H-Clamp - 932-0037

Signed at Port Perry, ON. CA - May 1st, 2021

------------------------------------------------

Brock Adamson (President & CEO)

ADAMSON SYSTEMS ENGINEERING, Inc.

1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario,

Canada

T: +1 905 982 0520, F: +1 905 982 0609

Email: info@adamsonsystems.com

Website: www.adamsonsystems.com

Table of Contents

Is10n Is10nbIs10n compactIs10n shortIs10n array