Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Adamson Manuals
  4. Subwoofer
  5. IS219
  6. User manual

Adamson IS219 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Table of Contents
Safety & Warnings
Read these instructions, keep them available for reference.
This manual can be downloaded from
Heed all warnings and follow all instructions.
A qualifi ed technician must be present during the installation and use of this product. This product
is capable of producing extremely high sound pressure levels and should be used according to the
specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will
not be liable for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such as when the
loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not
operate normally. Inspect your products regularly for any visual or functionality irregularities.
Protect the cabling from being walked on or pinched.
Read the appropriate IS-Series Rigging Manual before installing the product.
Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging
Manual.
Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker
system.
This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around
the enclosure with data storage devices such as hard drives.
In an effort to continuously improve its products, Adamson releases
updated accompanying software, presets and standards for its products.
Adamson reserves the right to change the specifications of its
products and the content of its documents with no prior notice.
Adamson Systems Engineering |
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
IS119 User Manual
3
4
5
6
7
8
9
Page 1

Advertisement

loading

Related Manuals for Adamson IS219

Summary of Contents for Adamson IS219

  • Page 1 Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
  • Page 2 IS219 User Manual Distribution Date: May 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.

  • Page 3: Table Of Contents

    Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.

  • Page 4: Product Introduction

    Advanced Cone Architecture give the IS219 an extremely high maximum SPL level. • With a height of 508mm / 20 in the IS219 fits under low stages. The enclosure has an unobtrusive visual design which blends seamlessly into the surrounding space, including identical grills at the front and back so cardioiod deployments appear identical to non-cardioid.

  • Page 5: Wiring

    IS219 Wiring The IS219 (994-0007, 994-5007) comes with 4x Neutrik Speakon™ NL4 connections, wired in parallel. The 2 rear connections pass pin 1 +/- to the driver and the 2 front connections pass pin 2 +/- to the driver. IS219 Rear IS219 Front The IS219b (994-0008, 994-5008) comes with an external barrier strip mounted to the rear grill.

  • Page 6: Amplification

    Amplification The IS-Series cabinets are paired with Lab.gruppen D-Series amplifiers. The maximum quantity of the IS219 per D200:4L model is 3. For a master list, please refer to the Adamson Amplification Chart, found on our website. https://adamsonsystems.com/support/downloads-directory/design-and-control/e-rack/283-amplification- chart-9/file 3 x IS219...

  • Page 7: Presets

    The Adamson LoadLibrary (https://www.adamsonsystems.com/support/downloads-directory/design-and-control/e- rack/245-adamson-load-library-5-0-1/file) contains a preset designed for IS219 deployments. For a master list, please refer to the Adamson PLM & Lake Handbook, found on our website. https://adamsonsystems. com/support/downloads-directory/design-and-control/e-rack/205-adamson-plm-lake-handbook/file IS219 subs should be phase-aligned to the additionally deployed array using measurement software.

  • Page 8: Weatherized

    Corrosion resistance extends the lifetime performance of your system in outdoor venues where water, salt and acidity can impact durability and function. All structural steel elements of Adamson weatherized cabinets – including rigging and rigging links – are made of a high yield strength stainless steel alloy that offers 100% corrosion resistance.

  • Page 9: Technical Specifications

    Weight (kg / lbs) 90 / 199 Colour Black & White (Standard), RAL Colours (On Demand) Processing Lake ** 12 dB crest factor pink noise at 1m, half space, using specified processing and amplification Adamson Systems Engineering | IS119 User Manual Page 9...