Cochlear Nucleus 7 Manual page 5

Bimodal pairing with wireless accessories and the Nucleus 7 Sound Processor
You can stream to your Nucleus 7 Sound Processor and ReSound hearing aid from a ReSound Multi Mic, Cochlear
Mini Microphone 2/2+, ReSound TV Streamer 2 or Cochlear TV Streamer.
Non-rechargeable
Turn on microphone.
2
Note: Ensure microphone is
2
charged.
1
5 sec
Rechargeable
Turn off ReSound
1
hearing aid and Nucleus 7
Sound Processor.
Plug power and audio cables into
2
TV streamer and connect to audio
source. Turn on TV streamer.
Control streaming to your sound processor and hearing aid from a wireless accessory
Note: Streaming must be started and stopped on each device individually.
Both devices Nucleus 7 Sound Processor
Streaming to both ears Nucleus Smart App
Through Apple's
Under 'Audio Sources' select the wireless
accessibility menu you can
accessory you are streaming from.
control streaming to both
the sound processor and
hearing aid. Triple click
the home button to access 2 sec
controls for turning on a
streaming source and to
adjust volume.
#
Press and hold the
button on your sound
processor for 2 seconds,
then release the button.
# For more information refer to the Apple Accessibility Quick Guide.
8
Microphone
Non-rechargeable
Press the pairing button once
3
for channel 1, twice for channel
2, three times for channel 3.
Note: The LED will blink orange
for 20 seconds while device is in
pairing mode.
Rechargeable
or
Turn on your hearing aid
4
and then turn on your
TV Streamer
sound processor.
Note: The LED will fl ash
blue to show pairing was
successful.
Press pairing button.
3
Note: The LED will blink orange for 20
seconds while device is in pairing mode.
ReSound hearing aid
3
sec
Rechargeable
ReSound hearing aid
Press and hold the push button on
your ReSound hearing aid.
or or
Cochlear CR310 Remote Control (optional) ReSound Remote Control 2 (optional)
Press and hold the Telecoil button for Press the streaming button on this
2 seconds, then release. remote control.
Bimodal pairing with wireless accessories for Kanso
You can stream to your Kanso
™
Mini Microphone 2/2+, ReSound TV Streamer 2 or Cochlear TV Streamer.
Pairing your sound processor and hearing aid with a wireless accessory
Non-rechargeable
2
1
5 sec
5
sec
Rechargeable
1 Turn off ReSound
hearing aid and Kanso 2
Sound Processor.
Control streaming to your sound processor and hearing aid from a wireless accessory
Note: Streaming must be started and stopped on each device individually.
Both devices
3
sec
Non-rechargeable
Streaming to both ears
Through Apple's accessibility
menu you can control streaming
to both the sound processor
and hearing aid. Triple click the
home button to access controls for
turning on a streaming source and
to adjust volume.
#
# For more information refer to the Apple Accessibility Quick Guide.
®
2 Sound Processor and ReSound hearing aid from a ReSound Multi Mic, Cochlear
®
Microphone
Turn on microphone. Press the pairing button once
2 3
for channel 1, twice for channel
Note: Ensure microphone
3
2, three times for channel 3.
tap
is charged.
Note: The LED will blink orange
for 20 seconds while device is in
pairing mode.
or
TV Streamer
Plug power and audio cables into Press pairing button.
2 3
TV streamer and connect to audio
Note: The LED will blink orange for 20
source. Turn on TV streamer.
seconds while device is in pairing mode.
Kanso 2 Sound Processor
Nucleus Smart App
Under 'Audio Sources' select the wireless
accessory you are streaming from.
or
Cochlear CR310 Remote Control (optional)
Press and hold the Telecoil button for
2 seconds, then release.
2 Sound Processor
™
Non-rechargeable
3
tap
5
sec
Rechargeable
4 Turn on your hearing aid
and then turn on your
sound processor. The LED
will flash blue to show
pairing was successful.
You can now begin
streaming to one or both
hearing devices.
ReSound hearing aid
3
3
sec
sec
Rechargeable Non-rechargeable
ReSound hearing aid
Press and hold the push button on your
ReSound hearing aid.
or
ReSound Remote Control 2 (optional)
Press the streaming button on this
remote control.
9