Installing A Drive Blank - Dell EMC PowerEdge MX840c Installation And Service Manual

CAUTION: Mixing drive blanks from previous generations of PowerEdge servers is not supported.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Figure 25. Removing a drive blank
Next steps
1. Install a drive or a drive

Installing a drive blank

Prerequisites
Follow the safety guidelines listed in the
CAUTION: Mixing drive blanks from previous generations of PowerEdge servers is not supported.
Steps
Insert the drive blank into the drive slot until the release button clicks into place.
30 Installing and removing sled components
blank.
Safety instructions section.