Advertisement
USER AND INSTALLATION SHEET
ENGLISH
LET'S SHOOT!
1
Place two 9 V batteries inside the battery holders and switch the MAGICFX
ON. The LED indicates if the pistol is ready to fire. Pulling the trigger while the indicator led is
still red can result in a delayed response. It can take up to 20 seconds for the LED to turn
green, if it takes longer it is advised to replace the batteries.
2
Make sure the MAGICFX
DEEJAY SHOTGUN is switched OFF and the safety pin is in locked
®
position before placing an electric cannon.
3
Firmly lock an unused electric cannon inside
the barrel with the cable facing upwards.
CONFETTI & STREAMER FX.
4
Connect the power cable of
the electric cannon.
DEEJAY SHOTGUN
®
5
Switch ON the MAGICFX
up green, if not, it is advised to replace the batteries for a quicker trigger respons.
6
Firmly hold with two hands and make sure the described safety zone is free of persons,
animals or objects. When it's time to shoot, pull the trigger!
7
Switch OFF the MAGICFX
Disconnect the power cable and remove the used cannon from the barrel and dispose it
without harming the environment.
Reload or store the MAGICFX
WWW.MAGICFX.EU
DEEJAY SHOTGUN and unlock the safety pin. Check if the LED lights
®
DEEJAY SHOTGUN and lock the safety pin.
®
DEEJAY SHOTGUN.
®
PART01939
rev 01-02
Advertisement
