ENERGY KINETICS System 2000 User's Information Manual
Frontier boilers
Hide thumbs
Also See for System 2000:
- Installation & service manual (38 pages) ,
- Owners and installation manual (26 pages) ,
- Owners and installation manual (37 pages)
Table of Contents
Advertisement
MH27877
ANSI Z21.13-2005
CSA 4.9-2005
Low-Press Boiler
www.energykinetics.com
INSTALLER:
PLEASE HANG THIS INFORMATION MANUAL AND ACCESSORY INSTRUCTIONS VISIBLY
NEXT TO THE BOILER USING THE SUPPLIED POUCH.
CONSUMER: PLEASE RETAIN THIS INFORMATION MANUAL AND ACCESSORY INSTRUCTIONS FOR
FUTURE REFERENCE.
System 2000
Frontier Boilers
USER'S INFORMATION MANUAL
GAS HEAT EDITION
MANUFACTURED BY:
ENERGY KINETICS, INC.
51 Molasses Hill Road
Lebanon, NJ 08833
(908) 735-2066
Gas Heat – Ninth Edition – September 2018
WARNING: If the information in this
manual is not followed exactly, a fire
or explosion may result causing
property damage, personal injury or
loss of life.
Do not store or use gasoline or
other flammable vapors and liquids
in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
o Do not try to light any appliance.
o Do not touch any electrical
switch; do not use any phone in
your building.
o Immediately call your gas supplier
from a neighbor's phone. Follow
the gas supplier's instructions.
o If you cannot reach your gas
supplier, call the fire department.
Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
®
®
or
www.system2000.com
This product meets the
®
Energy Star
guidelines
for efficiency.
ASME certified by EKI.
Certificate plate is under
the jacket on the steel
vessel.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ENERGY KINETICS System 2000
Summary of Contents for ENERGY KINETICS System 2000
- Page 1 If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, service agency or the gas supplier. System 2000 ® Frontier Boilers ® This product meets the ®...
-
Page 2: Please Read This First
Please Read This First….. Special Attention Flags Please pay particular attention to the following flags when you see them throughout this manual. DANGER: Notifies you of hazards that WILL cause severe personal injury, death or substantial property damage. WARNING: Notifies you of hazards that CAN cause severe personal injury, death or substantial property damage. CAUTION: Notifies you of hazards that WILL or CAN cause minor personal injury or property damage. - Page 3 FOR YOUR SAFETY READ BEFORE OPERATING If you do not follow these instructions exactly, a fire or explosion WARNING: may result causing property damage, personal injury or loss of life. This burner does not have a pilot. It is Use only your hand to turn the gas control knob. equipped with an ignition device which Never use tools.
-
Page 4: Table Of Contents
TABLE OF CONTENTS Page Topic Please Read This First Record of Installation Table of Contents System 2000 Boiler – Principle of Operation Digital Manager – Principle of Operations Blocked Vent Shutoff System In Case of No Heat Annual Maintenance Periodic Maintenance... -
Page 5: System 2000 Boiler - Principle Of Operation
Your System 2000 holds a minimal quantity of water so it begins to supply heat in about 90 seconds. This rapid response means that your rooms can be heated quickly to temperature. The System 2000 EK1 Frontier can heat water up to 100,000 BTU’s per hour and the EK2 Frontier up to 200,000 BTU/hr. -
Page 6: Blocked Vent Shutoff System
BLOCKED VENT SHUTOFF SYSTEM The SYSTEM 2000 boiler is equipped with a blocked vent shutoff system. The blocked vent shutoff system consists of an air pressure switch mounted on the front of the boiler piped into the combustion chamber of the boiler. Under normal operating conditions, the combustion chamber will be under negative pressure relative to the room. -
Page 7: In Case Of No Heat
If still no heat, contact a qualified service agency for help. ANNUAL MAINTENANCE The SYSTEM 2000 boiler requires an annual tune-up by a qualified service agency to maintain top efficiency and peak performance and to verify proper performance of all safety devices. -
Page 8: Inspection Of Flue Connections
INSPECTION OF FLUE CONNECTIONS The SYSTEM 2000 boiler burns gas and produces combustion products that must be vented outside the house or building. For chimney installations, there will be a flue pipe connecting the flue outlet of the boiler to the base of the chimney. -
Page 9: Limited Lifetime Warranty
In the event that such pressure vessel is found to be defective in material or workmanship during the first ten years, Energy Kinetics will repair or replace the pressure vessel at its option and include a labor allowance per the published schedule. - Page 10 The End User is required to make available for inspection by Energy Kinetics or its representative, the parts claimed to be defective and, if requested by Energy Kinetics, to ship said parts prepaid to Energy Kinetics at the above address for inspection or repair. In addition, the homeowner agrees to make all reasonable efforts to settle any disagreement arising in connection with this claim before resorting to legal remedies in courts.
Need help?
Do you have a question about the System 2000 and is the answer not in the manual?
Questions and answers
How do I adjust the hot water temperature
To adjust the hot water temperature on an ENERGY KINETICS System 2000, locate the thermostat on the domestic hot water storage tank. The normal setting for the hot water tank thermostat is 120°F. Adjust the thermostat to your desired temperature while ensuring it does not exceed safe limits. Additionally, check the high-limit aquastat, which is typically set at 215°F with a 10°F differential.
This answer is automatically generated