Table of Contents
Advertisement
Preparing the Camera
Attaching the Microphone Holder
To the Right Side of the Handle Unit
30
1 Attach the microphone holder to the handle unit.
2 Use a commercially available Phillips head ("crosshead") screwdriver
to secure it firmly with the 2 M4 bolts.
To an Accessory Shoe (Handle Unit or Camera)
1 Insert the part of the shoe mount bracket with the screw through the
mounting hole on the microphone holder, from below ( ). Align the
part of the shoe mount bracket with the female threading and tighten
from above ( ).
• It is recommended to leave about 4 mm of clearance.
2 Slide the shoe mount bracket into the accessory shoe and tighten the
lock screw ( ).
• Make sure to slide the microphone holder in the direction of the
arrow at the bottom of the attachment bracket.
Advertisement
Table of Contents
