Table of Contents
Advertisement
Recording Video and Photos
3 After you finish recording a clip, press the assignable button.
• The last clip that was recorded is played back for the selected duration. [Ð REVIEW] appears on the
screen.
• There will be no sound from the built-in speaker but the audio will be output from the × (headphone)
48
terminal and HDMI OUT terminal.
• You can use the joystick to jump back/forward within the clip. You can also touch or slide the onscreen
progress bar to move to a different position in the video (A 122).
• Press CANCEL or flick down on the screen to stop reviewing the clip.
• After the clip finishes playing back, or if you stop reviewing the clip, the camera returns to record standby
mode.
Options
[Entire Clip]:
Allows you to review the entire clip.
[Last 4 sec]:
Allows you to review just the last 4 seconds of the clip.
NOTES
NOTES
• If the camera switched cards during a recording, the camera will play back the clip on the card most recently
recorded on.
• You cannot review clips when continuous recording is activated.
Advertisement
Table of Contents
