Checking the Remaining Battery Charge
When the camera is turned on, you can check the approximate remaining battery usage time (in minutes) by
looking at any recording/playback screen or the [B System Setup] status screen (A 178). You can also check
the approximate charge level on the battery itself.
Press the CHECK button on the battery. An indicator will
light for approximately 3 seconds and show the
approximate remaining battery charge.
0-25%
26-50%
51-75%
76-100%
NOTES
• The remaining battery charge level displayed in minutes on the screen may not match the [B System Setup]
status screen or the indicators on the battery pack.
Using a Power Outlet
You can also power the camera directly from a power outlet using the CA-CP200 L Compact Power Adapter
(AC adapter). While the camera is powered using a power outlet, you can replace the battery pack even when
the camera is turned on.
1 Connect the power cord to the AC adapter and plug
it into a power outlet.
2 Connect the AC adapter's DC plug to the DC IN
terminal on the camera.
IMPORTANT
• Make sure to turn off the camera before connecting or
disconnecting the AC adapter.
• When using the AC adapter, do not fix it permanently to
one place as this may cause a malfunction.
Preparing the Power Supply
Battery charge
indicator
DC IN
terminal
19
CHECK button
AC adapter