RH Baby&child AVALON UPHOSTERED TWIN STORAGE BED Assembly Instructions

AVALON UPHOSTERED TWIN STORAGE BED - ASSEMBLY INSTRUCTIONS
PARTS INCLUDED
A [1] HEADBOARD
B [2] STORAGE RAILS AND BED STORAGE
C [1] FOOTBOARD
D [1] BASE
E [1] COVER PANEL
IMPORTANT SAFETY INSTRUCTIONS
Please read all instructions carefully before assembling.
1.
For your safety, assembly by two or more adults is strongly recommended.
2.
Keep instructions for future use.
3.
Use only vendor-supplied hardware to assemble. Using unauthorized
4.
hardware could jeopardize the structural integrity of the item.
800Lbs Max Weight Capacity.
5.
ASSEMBLY INSTRUCTIONS
1. Remove all drawers from the storage rails (B) as illustrated in FIGURE 1.
2. Set the bed storage (B) on the base (D). Align and attach the bed storage (B)
to the base (D) by using the Allen bolt (1), lock washer (3), flat washer (4) and
Allen wrench (5), as illustrated in FIGURE 2.
3. Repeat the above procedure with the storage rails (B) to attach them to the
base (D).
B
E
C
FIGURE 1
TOOLS NEEDED
A
Phillips-head Screwdriver (not included)
HARDWARE INCLUDED
NO. SKETCH
B
1
D
2
3
4
5
6
FIGURE 2
D
DESCRIPTION SPECIFICATION
Allen Bolt
M8 x 30mm
Allen Bolt
M8 x 40mm
Ø14 x Ø9 x 2mm
Lock Washer
Flat Washer
Ø19 x Ø9 x 2mm
Allen Wrench
57 x 23 x D4mm
Round-head Screw
M4 x 25mm
5
1
3
4
QTY.
6 pcs.
16 pcs.
22 pcs.
22 pcs.
1 pc.
10 pcs.
1 2 /