General Notes; General Safety Rules - Scheppach sm 150x Original Instruction Manual

Manufacturer:
Scheppach Maschinenfabrik GmbH & Co. KG
GÜnzburger Straße 69
D-89335 Ichenhausen / BRD
Dear customer,
we wish you a pleasant and successful working experi-
ence with your new scheppach circular saw for firewood.
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
• improper handling
• non-compliance with the instructions for use
• repairs by third party, non authorized skilled workers
• installation and replacement of non-original spare parts
• improper use
• failures of the electrical system due to the non-com-
pliance with the electrical specifications and the VDE
0100, DIN 57113 / VDE 0113 regulations
Recommendations:
Read the entire text of the operating instructions prior
to the assembly and operation of the device.
These operating instructions are intended to make it eas-
ier for you to get familiar with your device and utilize its
intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with your
machine and how to avoid dangers, save repair costs, re-
duce downtime, and increase the reliability and working
life of the machine.
In addition to the safety regulations contained herein, you
must in any case comply with the applicable regulations of
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and carefully
observed by each operator prior to starting the work. Only
persons who have been trained in the use of the machine
and have been informed on the related dangers and risks
are allowed to use the machine. The required minimum
age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of wood working machines must be observed.

General Notes

• When you unpack the device, check all parts for pos-
sible transport damages. In case of complaints the sup-
plier is to be informed immediately.
• Complaints received at a later date will not be acknowl-
edged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself famil-
iar with the device prior to using it.
• Use only original parts for accessories as well as for
wearing and spare parts. Spare parts are available from
your specialized dealer.
• Specify our part numbers as well as the type and year
of construction of the device in your orders.
sm 150x
Specifications
230 V/50 Hz
Motor
Input power
P1
Output
power P2
No load
speed 1/
min.
Work speed
m/s
Wheel sizes
ø mm
Drilling ø
mm

General Safety Rules

WARNING! When using electric tools basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury.
Read all these instructions before attempting to operate
your product. Save these instructions for future reference.
• Keep work area clear. Cluttered areas and benches in-
vite injuries.
• Consider work area environment. Do not expose tools
to rain. Do not use tools in damp or wet locations. Keep
work area well lit. Do not use tools in the presence of
flammable liquids or gases.
• Guard against electric shock. Avoid body contact with
un earthed or ungrounded surfaces.
• Keep other people away. Do not let others, especially
children, not involved in the work touch the tool or the
extension lead and keep them away from the work area.
• Store idle tools. When not in use, tools should be stored
in a dry locked-up place, out of reach of children.
• Do not force the tools. It will do the job better and safer
at the rate for which it was intended.
• Use the right tool. Do not force small tools to do the job
of a heavy duty tool. Do not use tools for purposes not
intended; for example do not use circular saws to cut
tree limbs or logs.
• Dress properly. Do not wear loose clothing or jewellery,
they can be caught in moving parts. Nonskid footwear is
recommended when working outdoors. War protective
hair covering to contain long hair.
• Use protective equipment. Use safety glasses. Use
face or dust mask if grinding operations create dust.
• Do not abuse the cable. Never pull the cable to discon-
nect it from the socket. Keep the cable away from heat,
oil and sharp edge.
• Secure work. Where possible use clamps or a vice to
hold the work. It's safer than using your hand.
• Don't overreach. Keep proper footing and balance at all time.
• Maintain tools with care. Keep cutting tools sharp and
clean for better and safer performance. Follow instruc-
tions for lubricating and changing accessories. Inspect
tool cables periodically and if damaged have them re-
paired by an authorized service facility. Inspect exten-
sion lead periodically and replace if damaged. Keep
handles dry, clean and free from oil and grease.
• Remove adjusting keys and wrenches. Form the habit
of checking to see that keys and adjusting wrenches
are removed from the tool before turning it on.
sm 200x
230 V/
400 V
50 Hz
430 W 550 W 600 W
2,800 2,800 2,800
22.0 29.3 29.3
150 200 200
12.7 16 16
GB 7