Linking Precis Enclosures - AMX Precis Instruction Manual

LINKING PRECIS ENCLOSURES

LINKING PRECIS ENCLOSURES
This section applies specifically to Precis models
with 32-bit processors and Ethernet link
connectors.
In a multi-enclosure system with an external
controller, the enclosure connected to the control
device receives all control information and relays
it via the links to the other enclosures.
A Precis with an Ethernet connector can have a
virtually unlimited number of linked enclosures.
Note: If any linked enclosures were not in the
original system, a new configuration file is
needed (call technical support; see page 5).
8
l
A
Link two enclosures using crossover cable
(or network cable with a crossover adapter).
l
B
Link three or more enclosures using network
cable and a HUB.
Precis Instruction Manual