Redefining Levels - AMX Precis Instruction Manual

Name New
4. Click the Modify Preset button. The Modify
Preset dialog appears (see the next graphic).
5. Select Source Channel 1 and Destination
Channel 4; click the Assign Switch button.
6. Select Source Channel 2 and Destination
Channels 2 and 3 (hold the Ctrl key when
multi-selecting); click Assign Switch.
Source Channels Assign Switch
7. Click OK.
8. From the Configure menu, select Configure
All VM Local Presets.
Modify Preset
Destination Channels
Precis Instruction Manual
MANAGING CONFIGURATION FILES
The system is now ready to execute the macro
(preset) using either the Control Panel or BCS
commands.

REDEFINING LEVELS

N
X Connect can be used to redefine levels (virtual
matrices). The following steps provide the
example of configuring the RGB connectors on a
12x8 Precis to switch Y/c and composite signals
by modifying existing (default) virtual matrices
(levels).
To reconfigure RGB connectors to switch Y/c
and composite:
1. Follow the steps for launching X
(see page 16).
2. In the Virtual Matrix view, right click the
Red virtual matrix and select delete. Repeat
with the Green virtual matrix.
3. From the Add menu, select Virtual Matrix.
The Assign Virtual Matrix Signals dialog
appears.
Standard Basic Tab Name Field
4. Type Y/c in the Name field.
5. Click the Standard Basic tab. From its list,
select R and click the Assign Signal(s)
N
Connect
Assign Signal(s)
17