Jetter JetWeb JX2-PRN1 Operator's Manual page 20

5.1 Description of Connections
20
Important!
• In case you buy a printer cable or fabricate your own cable, the following
minimum requirements, also with a view to EMC, must be met:
1. Number of cores:
2. Core cross-sectional area:
3. Connector (male):
4. Maximum cable length:
5. Shield:
• The shield must be connected to the metallised connector housings on both
ends of the cable with the greatest possible surface area. The braided shield
has to be made of tin-coated copper wires with a minimum degree of coverage
of 85 %.
25
0.25 mm²
SUB-D, metallised
2 m
complete shielding, no paired shielding
JetWeb
Jetter AG