Download Print this page
ELRO AG40SR11B Introduction
ELRO AG40SR11B Introduction

ELRO AG40SR11B Introduction

Outdoor solar siren

Advertisement

Quick Links

INTRODUCTION ELRO OUTDOOR SOLAR SIREN AG40SR11B:
The Outdoor Solar Siren AG40SRB11B is designed for use with the ELRO HOME ALARM SYSTEM AG4000.
Outdoor Siren:
The siren will emit loud piercing sound when activated. It also has tamper detection features to detect unauthorized
attempts to forcibly remove it from the wall. It features periodic blinking LED to deter intruders.
Installing your Outdoor Solar Siren:
Open the siren by removing its back cover. Then remove the cover of the control box to reveal the control box
underneath.
6V 1.2Ahr
rechargeable
battery
Inside the control box:
Set the DIP switches to the desired setting. Then connect up the 9V battery followed by the rechargeable battery.
Press the tamper switch and the front LED will flash.
Tamper
switch
Learning LED
Learning Key
DIP switches
1 - 6 (left to right)
Control Box –
hidden under
water proof cover
(below)
Control
box
cover
9V initial power
up battery
DIP switch setting:
Siren
Siren
Period
on/off
Switch
setting
DIP1
DIP2
(left most)
ON
15 mins
Siren on
OFF
3 mins
Siren off
Beep
Not used
on/off
DIP3
DIP 4-6
Beep on
Factory
use only
Beep off

Advertisement

loading
Need help?

Need help?

Do you have a question about the AG40SR11B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ELRO AG40SR11B

  • Page 1 INTRODUCTION ELRO OUTDOOR SOLAR SIREN AG40SR11B: The Outdoor Solar Siren AG40SRB11B is designed for use with the ELRO HOME ALARM SYSTEM AG4000. Outdoor Siren: The siren will emit loud piercing sound when activated. It also has tamper detection features to detect unauthorized attempts to forcibly remove it from the wall.
  • Page 2 Adding the HOME Outdoor Siren to the Home Alarm System AG4000: The Alarm Panel itself has a set function that has the default setting of Wireless Siren (Indoor and Outdoor) as “Disabled”. For the Siren to be paired successfully this need to be changed to ‘Enable’. The way of doing this is as follows: Press PIN + 04 + PARM key to enable the wireless siren for pairing function.
  • Page 3 This package can contain small parts and or material which can be dangerous for small children! Be aware of this, and keep this away from small children! www.elro.eu For more information about the ELRO HOME ALARM SYSTEM AG4000 visit SPECIFICATIONS Battery Type 6V 1.2Ah Lead acid battery x 1...