King Tony 9TY111 Series Operation Manual

GARAGE JACK
OPERATION MANUAL
9TY111
NO.
9TY112
NO.
WARNING
Please wear proper safety gear while working.
www.kingtony.com
Enjoy your work
KT NO. Capacity
9TY111-035-B 3.5T
9TY111-05-B 5T
9TY111-10-B 10T
9TY111-15-B 15T
9TY111-20-B 20T
Capacity
KT NO.
9TY112-02A-B 2T
9TY112-03A-B 3T
9TY112-04A-B 4T
9TY112-05A-B 5T
9TY112-06A-B 6T
9TY112-08A-B 8T
9TY112-10A-B 10T
9TY112-12A-B 12T
9TY112-15A-B 15T
9TY112-16A-B 16T
9TY112-20A-B 20T
9TY112-32A-B 32T
9TY112-50A-B 50T
● The owner must make sure that the user has
fully understood all instructions and warnings.
● Safety information shall be emphasized and
understood prior to use. The jack shall be
inspected as per the instruction manual prior
to use.
RAISING & LOWERING VEHICLE
● Make sure the jack and vehicle are on a hard
level surface.
● Consult the vehicle owner's manual to ascertain
the location of jack points and position the jack
beneath the prescribed lift point.
● Jacks are not designed to maintain heavy loads
for long periods of time.
Work range (mm)
172~372
218~474
220~483
1. Always set the vehicle parking brake and block
228~508
the wheels.
241~525
Work range (mm)
175~339
190~368
190~368
210~407
2. Place the handle into the socket and pump up
210~407
and down to raise the vehicle.
225~450
225~450
230~465
230~460
230~460
240~450
260~420
280~450
3. Place jack stands beneath the vehicle .
Do not get under the vehicle without jack stands.
4. After use, turn the release valve slowly
counterclockwise to lower the vehicle onto the
ground.(Do not get under or let anyone else
under the vehicle while lowering.)
5. Remove the jack stands.