Page 1
TRANSMISSION JACK OPERATION MANUAL 9TY145-015 Enjoy your work...
Page 2
WARNING The warnings, cautions and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the user that common sense and caution are attributes which cannot be built into the appliance, but must be supplied by the user. •...
Page 3
SAFETY PRECAUTIONS • The jack is designed for assembly / disassembly of automotive gearbox. Do not use for other purpose. • The jack is designed for use on hard, flat surface that is able to withstand the current load. Using on sloping and very soft surface, can lead to damage the cargo or personal inquiry.
Page 4
Responsibility of the owner and/or user • Before using this jack the owner and/or user needs to refer to with warnings and instructions of the manufacturer’s manual. • People working with this jack must be careful, skilled, knowledgeable and trained with safe use of this equipment and its proper use in the service of motor vehicle and their components.
Page 5
INSTALLATION OF THE TRANSMISSION JACK • Attach the two wheel stand by turning the screw according with clockwise direction. • Attach the four wheels to the base of the jack by screwing the upper nut accordance with clockwise direction and the lower nut. blocked using the key. •...
Page 6
www.kingtony.com customer service e-mail : service@kingtony.com 898TY145-015A-KT 297x210mm...
Need help?
Do you have a question about the 9TY145-015 and is the answer not in the manual?
Questions and answers