Arduino Nano RP2040 Connect Product Reference Manual page 3

ST LSM6DSOXTR 6-axis IMU
3D Gyroscope
±2/±4/±8/±16 g full scale
3D Accelerometer
±125/±250/±500/±1000/±2000 dps full scale
Advanced pedometer, step detector and step counter
Significant Motion Detection, Tilt detection
Standard interrupts: free-fall, wakeup, 6D/4D orientation, click and double-click
Programmable finite state machine: accelerometer, gyroscope and external sensors
Machine Learning Core
Embedded temperature sensor
ST MP34DT06JTR MEMS Microphone
AOP = 122.5 dBSPL
64 dB signal-to-noise ratio
Omnidirectional sensitivity
-26 dBFS ± 1 dB sensitivity
RGB LED
Common Anode
Connected to U-blox® Nina W102 GPIO
Microchip® ATECC608A Crypto
Cryptographic Co-Processor with Secure Hardware-Based Key Storage
I2C, SWI
Hardware Support for Symmetric Algorithms:
SHA-256 & HMAC Hash including off-chip context save/restore
AES-128: Encrypt/Decrypt, Galois Field Multiply for GCM
Internal High-Quality NIST SP 800-90A/B/C Random Number Generator (RNG)
Secure Boot Support:
Full ECDSA code signature validation, optional stored digest/signature
Optional communication key disablement prior to secure boot
Encryption/Authentication for messages to prevent on-board attacks
I/O
14x Digital Pin
8x Analog Pin
Micro USB
UART, SPI, I2C Support
Power
3 / 20 Arduino® Nano RP2040 Connect / Rev. 01 - 03/05/2021
Arduino® Nano RP2040 Connect