The Best Way To Ride Off; The Control Of Throttle Valve Handle; Inspection And Maintenance Before Riding; Routine Inspection - Sym Jet Euro X 50 Manual

Table of Contents

Advertisement

10. THE BEST WAY TO RIDE OFF

THE CONTROL OF THROTTLE VALVE HANDLE

Turn on the turn signal light before moving,
and make sure no vehicle is coming from
behind. Then, drive off.
During driving, attention should be paid to
vehicles ahead and behind and keep highly
alert at all times.

11. INSPECTION AND MAINTENANCE BEFORE RIDING

ROUTINE INSPECTION

Check Items
Engine oil
Fuel
Front
Brake
Rear
Front
Tires
Rear
Steering handle
Speedometer, lights, and
rearview mirror
Tightness of main
components
Abnormal points
CAUTION:
If any problem are found during routine inspections always correct the problem before riding the
scooter. If necessary, have the scooter inspected and repaired by an Authorized SANYANG dealer.
IPECTION OF FUEL LEVEL
Firmly support the scoter with its main stand on a leveled ground, turn the main switch to "ON" position,
check if the fuel meter needle moves.
Fuel gauge may be defective or electric circuit disconnected if there is some fuel in the tank, but the
needle does not move. Please ride slowly to an authorized service station to have your scooter
checked.
CAUTION:
Do not check the fuel level or refuel while the engine is running. It is not necessary to start engine to
check the fuel level.
Is there enough engine oil?
Is it enough? Is it Octane 90 or above
Braking condition? [Brake lever free play: 10~20mm]
Braking condition? [Brake lever free play: 10~20mm]
Is tire pressure normal? [Standard: 1.75g/cm
Is tire pressure normal? [Standard: 2kg/cm
Does the handle vibrate abnormally or is difficult to turn?
Is it operated properly? Do lights come on? Can it be seen clearly from
behind?
Are screws, nuts loosen?
Do the previous troubles still exist?
20
Deceleration
Check Key Points
2
2
Acceleration

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents