The Best Way To Drive Off; The Control Of Throttle Valve Handle; Inspection And Maintenance Before Riding; Routine Inspection - Sym JET 50 series Owner's Manual

THE CONTROL OF THROTTLE VALVE HANDLE

Ÿ
Turn on the turn signal light before moving, and make sure no vehicle is coming from behind. Then,
drive off.
Ÿ
During driving, attention should be paid to vehicles ahead and behind and keep highly alert at all
times.

10.INSPECTION AND MAINTENANCE BEFORE RIDING

ROUTINE INSPECTION

Check Items
Engine oil
Fuel
Brake
Tires
Steering handle
Speedometer, lights,
and rearview mirror
Tightness of main
components
Abnormal points
CAUTION:
Ÿ
If any problem founded during routine inspection, correct the problem before using the scooter again,
have your scooter checked and repaired by the "SYM dealer or authorized service personnel" if
necessary.
Deceleration
Is there enough engine oil?
Is it enough? Is it Octane 90 or above
Front Braking condition?
Rear Braking condition?
Front Is tire pressure normal? [Standard: 1.75g/cm
Rear Is tire pressure normal? [Standard: 2kg/cm
Does the handle vibrate abnormally or is difficult to turn?
Is it operated properly? Do lights come on? Can it be seen clearly
from behind?
Are screws, nuts loosen?
Do the previous troubles still exist?

9. The best way to drive off

Acceleration
Check Key Points
[Brake lever free play: 10~20mm]
[Brake lever free play: 10~20mm]
2
]
10.Inspection and maintenance before riding
2
]
19