Control Projector With The Pjlink Protocol; Control Projector With Tcp/Ip Communication Protocol - Vivitek DU6675 Remote Communicaton Manual

DU6675 DLP Projector Remote Communication Manual
Control key window
This window simulates keys on the remote controller and control panel.
Enter: Confirm and select function options
Menu: Press to display OSD menu. Press again to exit it.
Auto: Run the auto image adjustment function.
Blank: Pause the image projection, i.e. the projection image is masked.Press again to resume the projection.
Source: The signal source menu displays.Press to display signal source in the projection screen.
Tool: See user manual included with the products you want to use together with your Crestron equipment for its setup
Info: Display current projector status and Crestron setup.

Control projector with the PJLink protocol

PJLink is a standard designed by the Japan Business Machine and Information System Industries Association (JBMA) for
controlling projectors with genuine commands.A PJLink standard compliant projector from any supplier can be controlled
with these genuine commands.This product supports PJLink control commands. Please set up password for PJLink
connection in this page.
PJLink Security
Password
For details on PJLink standard commands and connection methods, please visit the PJLink official web site.

Control projector with TCP/IP communication protocol

This projector supports TCP/IP communication protocol which enables you to send RS-232 operation commands or
simulated IR commands to control projectors connected with RJ45 cable via terminal connection application software, e.g.
Tera Term.Please set up IP address and port number with the terminal connection application software before controlling
your projector with TCP/IP communication protocol:
IP Address: IP address of projector
Port: Please set transmission port number to 7000
See the section on serial interface RS-232 control commands for details on RS-232 operation commands or simulated IR
commands.
: Select On to enable PJLink password or Off to disable it.
: Set up password at length up to 32 characters.
16