Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vivitek D36 Series
Summary of Contents for Vivitek D36 Series
- Page 1 D36 Series (DU3661Z DH3660Z DH3665ZN DW3651Z) Digital Laser Projector USER MANUAL...
-
Page 2: Table Of Contents
Control Keypad ......................15 Remote Controller (SRC) + Function ................. 16 Operating Range ......................17 Batteries ........................17 Combo Key Settings ....................17 Installation Guide ......................18 Verify Installation Location ..................18 Cooling Notes ......................18 Installation Notice .....................19 Vivitek - D366/D365 Series User Manual v1.1... - Page 3 Digital Zoom ......................31 V Keystone .......................31 H Keystone .......................31 4 Corner ........................31 H Image Shift ......................32 V Image Shift ......................32 Projection ........................32 Test Pattern ......................32 CONTROL Menu ......................33 Direct Power On .......................33 Vivitek - D366/D365 Series User Manual v1.1...
- Page 4 Projector DataSheet ....................49 Projector DataSheet ....................50 Projector Time Table ....................51 6. Regulatory Compliance FCC Warning ......................53 Canada ........................53 Safety Certifications ....................53 Disposal and Recycling ....................53 7. RS-232 Communication Communication parameter setup ................54 Operation commands ....................54 Vivitek - D366/D365 Series User Manual v1.1...
-
Page 5: General Information
HDMI Licensing LLC in the United States and other countries. HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. All other product names used in this manual are the properties of their respective owners and are acknowledged. Vivitek - D366/D365 Series User Manual v1.1... -
Page 6: Important Safety Information
Please write down your projector model number and serial number and keep the information for maintenance purposes in the future. Should the equipment be lost or stolen, the information could also be used for the police report. Model number: Serial number: Vivitek - D366/D365 Series User Manual v1.1... -
Page 7: Laser Warning
Maximum laser energy 0.13mJ Total internal power >100w Apparent source size >10mm, at lens stop Divergence >100 mili Radian As with any bright light source, do not stare into the beam. RG2 IEC 62471-5:2015. Vivitek - D366/D365 Series User Manual v1.1... -
Page 8: Warning Labels
: 1.34 ms 雷射輻射 避免眼睛受到直接照射 2類雷射產品 波⻑: 449-461 nm 最⼤脈衝能量: 0.27 mJ, 脈衝時間: 1.34 ms GB 7247.1-2012 / IEC/EN 60825-1:2007 CLASS 1 LASER PRODUCT IEC/EN 60825-1:2014 PRODUIT LASER DE CLASSE 1 IEC/EN 60825-1:2014 Vivitek - D366/D365 Series User Manual v1.1... -
Page 9: General Notice
Direct or indirect hit of a laser beam on to the projector lens can severely damage the Digital Mirror Devices (DMD™). Sun Light Warning Avoid using the D366 Series in direct sun light. Sun light on the projector lens can severely damage the Digital Mirror Devices (DMD™). Vivitek - D366/D365 Series User Manual v1.1... -
Page 10: Getting Started
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service. Caution: Avoid using the projector in dusty environments. Vivitek - D366/D365 Series User Manual v1.1... -
Page 11: Projector Features
8. Lens Focus 4. Lens 5. Air Vents Important: Ventilation openings on the projector allow for good air circulation, which keeps the projector light source cool. Do not obstruct any of the ventilation openings. Vivitek - D366/D365 Series User Manual v1.1... -
Page 12: Connect Source Devices (Dh3660Z)
10. AC IN 11. Kensington Security Enter 12. RS232 13. Audio OUT Navigate ▲ ▼ ◄ ► 14. Audio IN 15. Mic IN 16. IR Receiver 17. Audio IN R/L 18. Security lock Vivitek - D366/D365 Series User Manual v1.1... -
Page 13: Connect Source Devices (Du3661Z)
10. AC IN 11. Kensington Security Enter 12. HDBaseT 13. RS232 Navigate ▲ ▼ ◄ ► 14. Audio OUT 15. Audio IN 16. Mic IN 17. IR Receiver 18. Audio IN R/L 19. Security lock Vivitek - D366/D365 Series User Manual v1.1... -
Page 14: Connect Source Devices (Dh3665Zn)
10. AC IN 11. Kensington Security Enter 12. RS232 13. Audio OUT Navigate ▲ ▼ ◄ ► 14. Audio IN 15. Mic IN 16. IR Receiver 17. Audio IN R/L 18. Security lock Vivitek - D366/D365 Series User Manual v1.1... -
Page 15: Connect Source Devices (Dw3651Z)
MENU for App settings, ▲ Up, ▼ Down, ◄ Left and ► Right are used as directional arrows, also included ENTER and EXIT. Controlling your smart device with the remote control: Warning: As a safety precaution, disconnect all power to the projector and connecting devices before making connections. Vivitek - D366/D365 Series User Manual v1.1... -
Page 16: Remote Controller (Src) + Function
Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Vivitek - D366/D365 Series User Manual v1.1... -
Page 17: Operating Range
2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the projector for prolonged periods. Combo Key Settings ID+0: Reset Remote Controller customer code to default settings. ID+(1~7): Set Remote Controller customer code to “1~7”. Vivitek - D366/D365 Series User Manual v1.1... -
Page 18: Installation Guide
Whatever the case may be, make sure to disconnect the power cord till after the projector enters the STANDBY status. Air Inlet ● Make sure there is no object blocking air input within 30 cm. ● Keep the inlet away from other heat sources ● Avoided heavy dust area Vivitek - D366/D365 Series User Manual v1.1... -
Page 19: Installation Notice
● All enclosures should pass a certified thermal evaluation to ensure that the projector does not recycle exhaust air. Setup and Projection options Front Rear Ceiling Front Ceiling Rear Vivitek - D366/D365 Series User Manual v1.1... -
Page 20: Mounting The Projector
● Ensure a sturdy base design to support the projector weight and avoid toppling over. Note: The drawing showing below is for referal only. It is not an accurate stand design drawing. Air intake Air outake Horizontal adjuster [Front View] [Side View] Vivitek - D366/D365 Series User Manual v1.1... -
Page 21: Projection Distance Vs. Projection Size
84.8 479.0 188.6 720.3 283.6 183.1 430.8 169.6 269.2 106.0 598.8 235.7 900.3 354.5 228.9 538.5 212.0 336.5 132.5 748.5 294.7 1125.4 443.1 286.1 646.2 254.4 403.9 159.0 898.2 353.6 1350.5 531.7 343.3 Vivitek - D366/D365 Series User Manual v1.1... -
Page 22: Dw3651Z (Wxga)
84.8 503.2 198.1 758.2 298.5 236.9 430.8 169.6 269.2 106.0 628.9 247.6 947.7 373.1 296.2 538.5 212.0 336.5 132.5 786.2 309.5 1184.7 466.4 370.2 646.2 254.4 403.9 159.0 943.4 371.4 1421.6 559.7 444.2 Vivitek - D366/D365 Series User Manual v1.1... -
Page 23: Projector Start Guide
Component is supported through the RGB to Component adapter. Using a single HDBaseT CAT5e (above) cable, the projector supports an HDBaseT connection distances to 100m/328ft. Please visit http://vivitekcorp.com/ for the NovoProjector User Manual download before using NovoConnect function.(available in DH3665ZN) Vivitek - D366/D365 Series User Manual v1.1... -
Page 24: Adjust Projector Tilt
Shift is a unique system that provides lens shift while maintaining a much higher ANSI contrast ratio than traditional lens shift systems. To view the Shift Range diagram and further clarification see page 25. Vivitek - D366/D365 Series User Manual v1.1... -
Page 25: Adjusting The Vertical Image Position
Lens Shift Range Diagram Lens shift range Screen Lens Shift Range Table Default Offset Full Height (A) Lens Shift V Range (B) DH3660Z / DH3665ZN 15 % 13 % DU3661Z 8.5 % 11.7% DU3651Z 13.9% Vivitek - D366/D365 Series User Manual v1.1... -
Page 26: On-Screen Display (Osd) Menu Settings
Depending on the video source, not all items in the OSD are available. For example, the Horizontal/Vertical Position items in the Computer menu can only be modified when connected to a PC. Items that are not available cannot be accessed and are grayed out. Vivitek - D366/D365 Series User Manual v1.1... -
Page 27: Input Menu
Full: Force to select Full Range(0~255). Limited: Force to select Limited Range(16~235). ● Instant Motion: Off: Disable the function and using normal alignment parameters. On: Enable the function and alignment parameters return to default. Vivitek - D366/D365 Series User Manual v1.1... -
Page 28: Video
5 to 15 minutes every thirty minutes or one hour. Signal Power on ● Use ◄/► to set On/ Off to enable or disable auto Power On by input signal. Vivitek - D366/D365 Series User Manual v1.1... -
Page 29: Picture Menu
● sRGB: Optimization RGB colors to reach true-to-life images with limited brightness setting. ● DICOM: To use for Digital Imaging and Communications in Medicine ● User: Personalization with preference of Brightness, Contrast, Color. Vivitek - D366/D365 Series User Manual v1.1... -
Page 30: Brightness
Offset: Adjust the contrast level of Red, Green,Blue. Picture Mode Reset This function will reset all Picture Mode to the defaut settings Note: “Picture Mode Reset “ is only reset according to input signal. Vivitek - D366/D365 Series User Manual v1.1... -
Page 31: Alignment Menu
◄/► to select a corner (Top Left, Top Right, Bottom Left, Bottom Right) ● H: use ◄/► to increase or decrease the Horizontal value ● V: use ◄/► to increase or decrease the Vertical value Vivitek - D366/D365 Series User Manual v1.1... -
Page 32: H Image Shift
Mount the projector on the ceiling and project the image from the rear of the screen. Test Pattern ● Use ◄/► to select Off / Grid , enable the test pattern image. the test pattern image Vivitek - D366/D365 Series User Manual v1.1... -
Page 33: Control Menu
◄/► to select (Normal, Eco, Custom Light ) ● Custom Light: use ◄/► to adjust brightness level between 25% to 100% High Altitude ● Use ◄/► to adjust cooling fan speed (Noraml, High) Vivitek - D366/D365 Series User Manual v1.1... -
Page 34: Ir Control
Set the gateway. The input method is the same as the setting for IP address. ● DNS: Set the DNS. The input method is the same as the setting for IP address. ● Aply: Press and use ▼/▲ to scroll through submenus Vivitek - D366/D365 Series User Manual v1.1... - Page 35 LAN/RJ45 port and remote/control the projector, as well as the related control commands supporting for each external device, kindly please get contact with the Support-Service team directly. Connecting with LAN 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). Vivitek - D366/D365 Series User Manual v1.1...
- Page 36 ● Subnet Mask: 255.255.255.0 ● Gateway: 0.0.0.0 ● DNS Server: 0.0.0.0 10. Press (Enter) / ► to confirm settings. Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher). Vivitek - D366/D365 Series User Manual v1.1...
- Page 37 Network Configuration DHCP (Enabled) (N/A) IP Address Subnet Mask Default Gateway DNS Server User Password Enabled (N/A) New Password Confirm Admin Password Enabled (N/A) New Password Confirm For more information, please visit http://www.crestron.com. Vivitek - D366/D365 Series User Manual v1.1...
- Page 38 Note: Fill in all fields as specified. User can click Send Test Mail to test what setting is correct. For successful sending an e-mail alert, you must select alert conditions and enter a correct e-mail address. Vivitek - D366/D365 Series User Manual v1.1...
- Page 39 By default installation for Windows, “TELNET” function is not included. But end-user can have it by way of “Turn Windows features On or Off” to be enabled. Open “Control Panel” in Windows Open “Programs” Vivitek - D366/D365 Series User Manual v1.1...
- Page 40 Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for Telnet-Control. Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms). (*, In Windows built-in “TELNET.exe” utility, “Enter” key pressed will have “Carriage-Return” and “New-Line” code.) Vivitek - D366/D365 Series User Manual v1.1...
-
Page 41: Settings Menu
● Press and use ▼/▲ to scroll through submenus ● Volume: use ◄/► to increase or decrease the projector sound volume ● Mic: use ◄/► to switch ON/OFF the built in microphone of projector. Vivitek - D366/D365 Series User Manual v1.1... -
Page 42: Blank Screen Color
● Press ▼/▲ button to scroll to the Language submenu. ● Press to enter the advanced settings screen. ● Press ▼/▲ button to scroll and highlight your language. ● Press the MENU button to exit the advanced Setting Language Vivitek - D366/D365 Series User Manual v1.1... -
Page 43: Reset All
Position items in the Computer menu can only be modified when connected to a PC. Items that are not available cannot be accessed and are grayed out. INFO Screen DH3660Z/DU3661Z/DW3651Z DH3665ZN This screen displays the projector current status information to be used for technical support. Vivitek - D366/D365 Series User Manual v1.1... -
Page 44: Troubleshooting
For example, if you replace batteries and the problem remains, put the original batteries back and go to the next step. Keep a record of the steps you take when troubleshooting: The information may be useful when calling for technical support or for passing on to service personnel. Vivitek - D366/D365 Series User Manual v1.1... -
Page 45: Led Indicator Messages
● Set the Phase and Clock settings on the Input -> Analog menu of the OSD to the default settings. ● To ensure the problem is not caused by a connected PC’s video card, connect to another computer. Vivitek - D366/D365 Series User Manual v1.1... -
Page 46: Light Source Problems
Include a description of the problem and a checklist of the steps you took when trying to fix the problem: The information may be useful to service personnel. For servicing, return the projector to the place you purchased it. Vivitek - D366/D365 Series User Manual v1.1... -
Page 47: Hdmi Q&A
HDMI Licensing, LLC actively investigates these instances to ensure that the HDMI trademark is properly used in the market. We recommend that consumers buy their cables from a reputable source and a company that is trusted. Vivitek - D366/D365 Series User Manual v1.1... -
Page 48: Specifications
5. Specifications USER MANUAL 5. Specifications Projector Dimensions Vivitek - D366/D365 Series User Manual v1.1... -
Page 49: Projector Datasheet
340W (Light Mode : Normal), 270W (Light Mode : Eco), (Light Mode : Eco), Power Consumption <0.5W (Standby Mode: Eco), <2W <0.5W (Standby Mode: Eco), <2W (Standby Mode:On by Lan) (tandby Mode:On by Lan) Vivitek - D366/D365 Series User Manual v1.1... -
Page 50: Projector Datasheet
Available Colors White Noise Level 35dB/33dB (Normal/Eco. Mode) Power Supply AC 100-240V, 50/60Hz 340W (Light Mode : Normal), 270W (Light Mode : Eco), Power Consumption <0.5W (Standby Mode: Eco), <2W (tandby Mode:On by Lan) Vivitek - D366/D365 Series User Manual v1.1... -
Page 51: Projector Time Table
○ (FS) ○ (FS) 1680 x 1050 64.67 59.88 ○ ○ 1680 x 1050 5.29 59.95 ○ ○ 1920 x 1080 67.5 ○ (FS) ○ (FS) 1920 x 1200 74.038 59.95 ○ ○ Vivitek - D366/D365 Series User Manual v1.1... - Page 52 ○ (FS) ○(FS/TB/SBS) 1080p 67.5 ○ (FS) ○(FS/TB/SBS) ○ : Supported frequency - : Not Supported frequency FS => Field Sequential TB => Top / Bottom SBS => Side-By-Side FP => Frame Packing Vivitek - D366/D365 Series User Manual v1.1...
-
Page 53: Regulatory Compliance
This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. Vivitek - D366/D365 Series User Manual v1.1... -
Page 54: Rs-232 Communication
Set up brightness op bright = 100[CR] OP BRIGHT = 100 Out of range or not support op bright = 200[CR] OP BRIGHT = NA Illegal command op abright = 100[CR] *Illegal format# Vivitek - D366/D365 Series User Manual v1.1... - Page 55 Projector Light projector.light 0 : Off 1 : On HSG/Red Gain hsg.r.gain 0 ~ 100 HSG/Green Gain hsg.g.gain 0 ~ 100 HSG/Blue Gain Hsg.b.gain 0 ~ 100 HSG/Cyan Gain hsg.c.gain 0 ~ 100 Vivitek - D366/D365 Series User Manual v1.1...
- Page 56 0 ~ +60 H Image Shift img.hshift -50 ~ +50 V Image Shift img.vshift -50 ~ +50 Projection projection 0 = Front 1 = Rear 2 = Front+ Ceiling 3 = Rear + Ceiling Vivitek - D366/D365 Series User Manual v1.1...
- Page 57 MENU Position menu.position 0 : Cneter 1 : Up 2 : Down 3 : Left 4 : Right MENU Timer menu.timer 0 : Off 1 : 20 2 : 40 3 : 60 Vivitek - D366/D365 Series User Manual v1.1...
- Page 58 1 = On Model model <string> Pixel Clock pixel.clock <string> H Refresh Rate h.refresh <string> V Refresh Rate v.refresh <string> Blank blank 0 = Off 1 = On Power On power.on Power Off power.off Vivitek - D366/D365 Series User Manual v1.1...
- Page 59 0 : Off 1 : On Freeze freeze 0 : Off 1 : On Input Select input.sel 1 :RGB 4: Video 6: HDMI 1 9: HDMI 2 12: HDMI 3 15: HDBaseT Vivitek - D366/D365 Series User Manual v1.1...
- Page 60 Tel: 886-2-8797-2088, ext. 6899 (Direct) Tel: 0800-042-100 (Toll-Free) Email: kenny.chang@vivitek.com.tw URL: www.vivitek.com.tw 中国/China Vivitek客服中心 上海市闵行区申长路618号绿谷广场A座7楼 邮政编码: 201106 400客服热线: 400 888 3526 公司电话: 021-58360088 客服邮箱: service@vivitek.com.cn 官方网站: www.vivitek.com.cn Visit www.vivitek.eu for more product info Copyright© 2020 Delta Electronics, Inc. All Rights Reserved.