How To Use The Manual; General Maintenance Information; Environmental Protection; Exclusion Of Liability - DT SWISS Ratchet EXP Maintenance Manual

Hide thumbs Also See for Ratchet EXP:
Table of Contents

Advertisement

1.6 HOW TO USE THE MANUAL

The steps described in this manual must be carried out in the order they are shown. If steps are
ignored or executed in a wrong order, the function of the component cannot be guaranteed.

1.7 GENERAL MAINTENANCE INFORMATION

Unless otherwise specified, moving parts, threads, O-rings and seals must be greased before
assembly.
CLEANING
For an optimal result of the maintenance works, every component that will be disassembled must
be cleaned. Only use cleaners which do not damage the components. Especially the cleaning
of O-rings and seals requires mild cleaners. Observe the instructions for use of the respective
cleaner.
DT Swiss recommends the following cleaners:
• Motorex Rex
• Motorex Swissclean
• Motorex OPAL 2400, 3000 OPAL, OPAL 5000
Use soap water or similar mild cleaners for external cleaning.
TOOLS
To ensure a damage-free mounting and dismounting of the components, only use the tools which
are mentioned in this manual. Special tools are indicated at the beginning of a chapter in the
table "Required material".
The use of different tools is at the discretion of the user. If components are damaged by the usage
of differing tools, the user is liable.
DT Swiss special tools are precision tools. Damage-free mounting and dismounting of the
components can only be ensured if the tools are working properly and if the condition of the tools
are perfect. Always keep the tools in their original packaging or adequate devices to prevent
damage.

1.8 ENVIRONMENTAL PROTECTION

The statutory regulations shall apply. Whenever possible, avoid creating waste. Waste, especially
carbon, lubricants, cleaners and any other fluids must be disposed in an environmentally
compatible manner.
Only print this manual if electronic usage is not possible.

1.9 EXCLUSION OF LIABILITY

The activities listed in this manual may only be carried out by persons with sufficient specialist
knowledge. The user is liable for any damage or consequential damage caused by wrongly
maintained or installed components. If you have doubts, please contact your region's DT Swiss
pro level service center.

1.10 WARRANTY

Warranty conditions, see www.dtswiss.com
4

Advertisement

Table of Contents
loading

Table of Contents