Advertisement
6 Electrial specifications
·
Pin assignment GigE connector (RJ45)
·
Pin assignment I/O connector
6.1 Pin assignment GigE connector (RJ45)
8-pin RJ45 socket
Pin
Designation 100BASE-TX
1
Tx+
2
Tx-
3
Rx+
4
5
6
Rx-
7
8
The RJ45 socket of the IDS NXT rio complies with the IEC 60603-7 standard.
6.2 Pin assignment I/O connector
12-pin M12 connector (Attend 216A-12MSR)
Pin
Signal
1
VBUS
2
VBUS GND
3
Opto IN (0)
4
Opto IN (1)
5
Opto IN (COM)
6
Opto OUT (COM)
7
Opto OUT (1)
8
Opto OUT (2)
9
RS232 (RxD)
10
RS232 (TxD)
11
Opto IN (2)
12
Opto OUT (0)
Shield
Shield
You can check the color assignment of the cable on the
The maximum length of the I/O cable is 30 m. The cable must be shielded.
2021-04-13
Designation 1000BASE-T
Bl_DA+
Bl_DA-
Bl_DB+
Bl_DC+
Bl_DC-
Bl_DB-
Bl_DD+
Bl_DD-
Description
Power supply: 12-24 V DC +20 %
Reference level (ground) for power supply and RS-232
Trigger input with optocoupler
Input 1 with optocoupler
Reference level for all Opto IN
Reference level for all Opto OUT
Output 1 with optocoupler
Output 2 with optocoupler
Serial interface
Serial interface
Input 2 with optocoupler
Flash output with optocoupler
Shield
Website
IDS NXT: Setup IDS NXT rio
directly at the specific accessory item.
Fig. 2: RJ45
socket, camera
rear view
Fig. 3: I/O connector,
camera rear view
11
Advertisement
