SATO CL4NX User Manual page 13

2. Set the print language to SBPL.
PDF Direct Print works only on SBPL (SATO Barcode Printer Language) protocol. You need to set
the printer language to SBPL in the [Settings] > [Applications] > [Protocol] menu.
• Do not set the [Protocol] to [AUTO].
3. Set the media size.
Set the length and width of the media in the [Settings] > [Printing] > [Label Length] and the
[Settings] > [Printing] > [Label Width] menus.
• The Auto Measure function is not recommended to be used for PDF direct print.
Disable the [Auto Measure] and set the [Label Length] and [Label Width] of the media
accordingly.
13