Table of Contents
Advertisement
1.
Loosen the knob A which is located under the armrests.
2.
Adjust the handles B to the required depth and angle.
3. Re-tighten the knob A to lock the handles in the new
position.
4.7 Width adjustment - frame
WARNING!
Risk of pinching
– Be aware of the risk of getting fingers pinched
when adjusting the frame
CAUTION!
Risk of instability
– The frame must be symmetrical and have the
same width on both sides.
3
2
1
•
The walking table can be adjusted in three widths.
•
The H-shaped lower frame has the same dimensions in
the front and back.
Adjust the width so that the walking table can pass
through the most narrow passage in the premises.
1532567-G
B
A
B
A
A
1. Lay the walking table down.
2. Remove screws A.
3. Adjust the frame B to the required width on one side.
4. Reinsert the screws and tighten with a minimum of 10
Nm.
5. Repeat the procedure on the other side.
6 mm allen key
4.8 Height adjustment
To get the correct height of the walking table we recommend
measuring the distance from elbow to heel while the user
is lying down.
4.8.1 Height adjustment - Step Up Manual
B
Lift the armrests B slightly upwards in order to pull the
pin A out and adjust the support platform to the required
height.
Check that the pin A is pressed in correctly, in order
to lock the height adjustment.
WARNING!
Risk of falling
– Do not pull out the pin if the user is putting
weight on the support platform.
Usage
B
A
9
Advertisement
Table of Contents
