Using The Height Adjustment Memory - Invacare Dolomite Jazz 510 User Manual

®
Dolomite Jazz
The handles should usually
be positioned at wrist
height. Therapist may suggest
different heights depending on
specific needs of the client.
3. Lock the handlebar by pushing the handle slightly downwards, a
distinct "click" is heard when the handle is locked in its position.
4. Repeat the procedure on the other side.
10

3.10 Using the Height Adjustment Memory

When adjusting the handle height for the first time, the built-in height
adjustment memory can be used.
1. To access the height memory for the first time, raise the push
handles to the highest position to reveal the adjustment screw A.
2. Loosen the screw of the height adjustment memory, but do not
remove it. Adjust the handles to a suitable height and retighten
the screw.
3. Push the handles slightly downwards to fix the height.
Suitable tool to use is a 1,5 mm hexagon key (not included).
If the adjustment screw A is removed by mistake and the
height adjustment memory can not be accessed, raise the
handle to the highest position to make the height adjustment
memory visible again.
A
1560692-A